企業專屬首頁
> 電子元件／工業用機器
> 制御機器首頁
> CX-422-P-C05
CX-422-P-C05 | 小型光電感測器 [放大器內藏] CX-400 Ver.2
![小型光電感測器 [放大器內藏] CX-400 Ver.2](/ac/e/fasys/sensor/photoelectric/thumbnail/cx-422-p-c05.png)
|
※產品實際尺寸以實物為準
- 停止接單
2021年9月30日
| 品名 | CX-422-P-C05 |
| 型號 | CX-422-P-C05 |
| 產品 | Compact Photoelectric Sensor |
| 詳細 | Diffuse reflective |
| 產品名稱 | 小型光電感測器 [放大器內藏] CX-400 Ver.2 |
小型光電感測器 [放大器內藏] CX-400 Ver.2
CX-422-P
CX-422-P
-
Cable length and accessories of recommended substitutes are different.
詳細規格 2021年9月30日的資訊
| 項目 | 內容 |
|---|---|
| 品名 | CX-422-P-C05 |
| 型號 | CX-422-P-C05 |
| Regulatory compliance | EMC Directive, RoHS Directive |
| Sensing range | 800 mm 31.496 in (Note) The sensing range and hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 × 200 mm 7.874 × 7.874 in) as the object. |
| Sensing object | Opaque, translucent or transparent object (Note) Make sure to confirm detection with an actual sensor before use. |
| Hysteresis | 15 % or less of operation distance (Note) The sensing range and hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 × 200 mm 7.874 × 7.874 in) as the object. |
| Repeatability(perpendicular to sensing axis) | 1 mm 0.039 in or less |
| Supply voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Current consumption | 15 mA or less |
| Output | PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current) |
| Output:Output operation | Switchable either Light-ON or Dark-ON |
| Output:Short-circuit protection | Incorporated |
| Response time | 1 ms or less |
| Operation indicator | Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type) |
| Stability indicator | Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type) |
| Power indicator | - |
| Sensitivity adjuster | Continuously variable adjuster(incorporated on the receiver for thru-beam type) |
| Automatic interference prevention function | Incorporated(Two units of sensors can be mounted close together.) |
| Protection | IP67 (IEC) |
| Ambient temperature | - 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉ |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each |
| Shock resistance | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Emitting element (modulated) | Infrared LED |
| Emitting element (modulated):Peak emission wavelength | 860 nm 0.034 mil |
| Material | Enclosure: PBT (polybutylene terephthalate) Lens: acrylic Indicator cover: acrylic |
| Cable | 0.2 mm23-core cabtyre cable, 0.5 m 1.640 ft long |
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| Accessory | - |
相關產品(附屬品) 2021年9月30日的資訊
|
| 品名 | MS-AJ1 |
| 型號 | MS-AJ1 |
| 產品名稱 | 通用感測器安裝支架 MS-AJ |
|
|
| 品名 | MS-AJ1-A |
| 型號 | MS-AJ1-A |
| 產品名稱 | 通用感測器安裝支架 MS-AJ |
|
|
| 品名 | MS-AJ1-M |
| 型號 | MS-AJ1-M |
| 產品名稱 | 通用感測器安裝支架 MS-AJ |
- (02)2757-1808 授理時間 9:00-17:30(除敝司休假日)
