AFP7AD4H | FP7 類比量輸入輸出模組

截至2024年04月28日
為了改善本產品，會有在未事先通知的情況下變更本產品的規格及設計的情況。

詳細規格

項目	內容
品名	AFP7AD4H
型號	AFP7AD4H

ANALOG INPUT SPECIFICATIONS

項目	内容
Number of input channels	4 channels
Input range (resolution max. 16 bits):Voltage	-10 to +10 V (resolution: 1/62,500) 0 to 10 V (resolution: 1/31,250) 0 to 5 V (resolution: 1/31,250) 1 to 5 V (resolution: 1/25,000) (Note)The full scale (F.S.) on the accuracy of an analog voltage input range from 1 to 5 V and that of an analog current input range from 4 to 20 mA are 0 to 5 V and 0 to 20 mA, respectively.AR7
Input range (resolution max. 16 bits):Current	0 to 20 mA (resolution: 1/31,250) 4 to 20 mA (resolution: 1/25,000) (Note)The full scale (F.S.) on the accuracy of an analog voltage input range from 1 to 5 V and that of an analog current input range from 4 to 20 mA are 0 to 5 V and 0 to 20 mA, respectively.
Conversion speed:Voltage / Current	25 micro s/channel (at not insulated channels), 5 ms/channel (at insulated channels)
Overall accuracy	plus or minus 0.05 % F.S. or less (at 25 degrees 77 degrees Fahrenheit ), plus or minus 0.1 % F.S. or less (at 0 to 55 degrees 32 to 131 degrees Fahrenheit )
Input impedance:Voltage input	1 MOhm
Input impedance:Current input	250 Ohm
Absolute maximum input	-15 to +15 V Voltage input, -2 to +30 mA Current input
Insulation method:Between the input terminal and internal circuits	Photocoupler, Insulation type DC/DC converter
Insulation method:Between channels	PhotoMOS relay
Digital processing:Averaging:Number of times	Setting range: 2 to 60,000 times
Digital processing:Averaging:Time duration	Time setting: 1 to 1,500 ms (at not insulated channels), 200 to 60,000 ms (at insulated channels)
Digital processing:Averaging:Moving	Range setting: 2 to 2,000 times
Digital processing:Scale conversion setting	Any value within plus or minus 30,000
Digital processing:Offset setting	Any value within plus or minus 3,000
Digital processing:Gain setting	Any value within 9,000 to 11,000
Input range change method	Selectable for each channel
Conversion execution / non-execution channel setting	Selectable for one channel unit
Maximum and minimum value holding	Settable for each channel
Comparison of upper and lower limit values	Settable for each channel (hysteresis)
Broken wire detection	When less than 0.7 V / 2.8 mA (only when voltage input range 1 to 5 V or current input range 4 to 20 mA is set.)
Buffer function	3 trigger types: Soft trigger, External trigger and Input level
Trigger input section:Insulation method	Optical coupler insulation
Trigger input section:Rated input voltage	24 V DC
Trigger input section:Rated input current	4.5 mA approx. (at 24 V DC)
Trigger input section:Input impedance	5.1 kOhm approx.
Trigger input section:Operating voltage range	21.6 to 26.4 V DC
Trigger input section:Min. ON voltage / Min. ON current	19.2 V / 3.5 mA
Trigger input section:Max. OFF voltage / Max. OFF current	5 V / 1.5 mA
Trigger input section:Response time:OFF→ON	0.2 ms or less
Trigger input section:Response time:ON→OFF	0.2 ms or less
Trigger input section:Input points per common	2 points/common
External connection method	Terminal block (M3 terminal screw)

COMMON GENERAL SPECIFICATIONS

項目	内容
Ambient temperature	0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance	147m/s2以上 XYZ各方向3回(IEC 61131-2)
Noise immunity	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
Operating condition	Free from corrosive gasses and excessive dust

INDIVIDUAL GENERAL SPECIFICATIONS

項目	内容
Rated voltage range	-
Current consumption	100 mA or less
Net weight	130 g approx.

回到頁首

回到頁首