企業專屬首頁 > 電子元件／工業用機器 > 制御機器首頁 > FP7 高速計數器模組 > AFP7HSC2T

AFP7HSC2T | FP7 高速計數器模組

CAD　型錄　手冊　軟體等

※產品實際尺寸以實物為準

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名	AFP7HSC2T
型號	AFP7HSC2T
產品	FP7 High-speed Counter Units
產品名稱	FP7 高速計數器模組

截至2024年04月28日
為了改善本產品，會有在未事先通知的情況下變更本產品的規格及設計的情況。

詳細規格

項目	內容
品名	AFP7HSC2T
型號	AFP7HSC2T
Input:Insulation method	Photocoupler insulation
Input:Rated input voltage	12 to 24 V DC / 3.5 to 5 V DC
Input:Input impedance:24 V DC	3.0 kOhm approx.
Input:Input impedance:5 V DC	390 Ohm (5 V DC) approx.
Input:Usage voltage range:24 V DC	10.8 to 26.4 V DC
Input:Usage voltage range:5 V DC	3.5 to 5.25 V DC
Input:Min. ON voltage / Min. ON current:24 V DC	10 V DC / 4 mA
Input:Min. ON voltage / Min. ON current:5 V DC	3.0 V DC / 4 mA
Input:Min. OFF voltage / Min. OFF current:24 V DC	2.0 V DC / 2 mA
Input:Min. OFF voltage / Min. OFF current:5 V DC	1.0 V DC / 0.5 mA
Input:Input time constant setting	None, 0.1 micro s, 0.2 micro s, 0.5 micro s, 1.0 micro s, 2.0 micro s and 10.0 micro s
Count function:No. of counters	2ch
Count function:Counter type	Linear counter / Ring counter
Count function:Counting range	Signed 32-bit (-2,147,483,648 to +2,147,483,647)
Count function:Max. input frequency	4 MHz / 8 MHz for individual input (phases A and B) (Duty ratio 50 plus or minus 10 %), 4 MHz / 8 MHz for direction discrimination input (Duty ratio 50 plus or minus 10 %), 4 MHz / 8 MHz /16 MHz for 2-phase input (Duty ratio 50 plus or minus 10 %, Phase shifting below 5 %)
Count function:Input signal	Phases A, B and Z
Count function:External I/O	Control signal input: 4 points (2 points/ch), External output: 4 points (2 points/ch)
Count function:Counter input type	Individual input (Phases A and B): 1 multiple, 2-multiple Direction discrimination input: 1 multiple, 2-multiple 2-phase input: 1 multiple, 2-multiple, 4-multiple
Measurement function:Frequency measurement function	Measures the intervals between the variations of count values, and calculates the frequency.
Comparison function:Target value match function	Depending on the count direction, sets or resets the output when the counter value reaches the target value.
External output:Comparison result output function	Outputs the result of comparison function.
Other functions:Capture function	Acquires the current count value from the edges of input signals, and stores it in the capture 0 register or capture 1 register. The value of the specified capture register will be overwritten by a new value and the old value will be discarded every time a counter value is captured.
Other functions:Interrupt input function	Available (2 points/ch, Max. 8 points/unit) (Note) The interrupt input function can be used for 8 points per unit and for a maximum of 8 units (max. 64 points) in the whole system. However, the entire scan time slows down as more interrupt programs are used. Minimize the use of interrupt programs. (Note) The priority order for interrupt inputs is as follows; In a unit, from the smallest interrupt bit. In the whole system, from the smallest unit number.

COMMON GENERAL SPECIFICATIONS

項目	内容
Ambient temperature	0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
Operating condition	Free from corrosive gasses and excessive dust

INDIVIDUAL GENERAL SPECIFICATIONS

項目	内容
Rated voltage range	-
Current consumption	65 mA or less
Net weight	130 g approx.

回到頁首

AFP7HSC2T | FP7 高速計數器模組

詳細規格

COMMON GENERAL SPECIFICATIONS

INDIVIDUAL GENERAL SPECIFICATIONS

相關產品(附屬品)

相關產品

PLC

品名	AFP2801
型號	AFP2801
產品名稱	散線連接器