AFP7MXY32DWD | 多功能輸入輸出模組

截至2024年04月28日
為了改善本產品，會有在未事先通知的情況下變更本產品的規格及設計的情況。

詳細規格

項目	內容
品名	AFP7MXY32DWD
型號	AFP7MXY32DWD

Function specifications

項目	内容
Basic input and output : Number of occupied I/O points	Input/Output: 64 points each (4 words)
Basic input and output : Number of external I/O points	Input: 16 points, Output: 16 points
Basic input and output : Input time constant setting	None, 0.5 μs, 1 μs, 2 μs, 4 μs, 8 μs, 16 μs, 32 μs, 64 μs, 96 μs, 128 μs, 256 μs, 2 ms, 4 ms, 8 ms Setting possible in 2-point units
Basic input and output : Output polarity setting	No output, N channel, P channel, Both channels (push pull output), Differential output Setting possible in 4-point units
Interrupt : Number of points	8 points/unit (Max. of 8 units can be used with FP7 system.)
Interrupt : Mode	Non-interrupt unit, Interrupt unit (Set using DIP switches)
Interrupt : Interrupt condition setting	Terminal input, Comparison match
Counter : Counter type	Ring counter Linear counter
Counter : Input mode	Direction distinction, Individual input, Phase input
Counter : Number of channels	4 channels (Note) : When using elapsed value hold function, number of channels will be limited.
Counter : Counting range	Signed 32 bit (-2,147,483,648 to +2,174,483,647) Setting possible of upper and lower limits
Counter : Max. counting speed	5 V input voltage: 500 kHz 12 V input voltage: 500 kHz (350 kHz with phase input) 24 V input voltage: 250 kHz (180 kHz with phase input) (Note) With 50 % duty input pulse.
Counter : Min. input pulse width	0.5 μs
Counter : Comparison output setting	Max. 8 points Terminal input counter: 4 channels
Counter : Others	Transfer multiplication function (x 1, x 2, x 4) Elapsed value offset / preset function Elapsed value hold function, setting of upper / lower count limits Input pulse frequency measurement Overflow / underflow detection
Pulse output : Number of channels	4 channels
Pulse output : Output mode	Direction distinction, Individual output, Phase output, Comparison match stop
Pulse output : Output terminals : Pulse output function	2 terminals / channel (B11 to B18 terminals)
Pulse output : Output terminals : PWM output function	1 terminal / channel (B11, B13, B15 and B17 terminals)
Pulse output : Output frequency : Pulse output function	1 to 500 kHz (Settable by 1 Hz) (Note) : When push pull setting or output current is 0.1 A. Varies according to load.
Pulse output : Output frequency : PWM output function	1 to 100 kHz (Settable by 1 Hz) (Note) : When push pull setting or output current is 0.1 A. Varies according to load.
Pulse output : Duty ratio : Pulse output function	50 % approx. (Fixed)
Pulse output : Duty ratio : PWM output function	0 to 100 % (Settable by 0.1%)
Pulse output : Other functions	Pulse number measurement function (dedicated pulse counter 4 channels)

COMMON GENERAL SPECIFICATIONS

項目	内容
Ambient temperature	0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance	147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity	1,000 V [p-p] with pulse width 50 ns and 1 μs (using a noise simulator)
Operating condition	Free from corrosive gasses and excessive dust

INDIVIDUAL GENERAL SPECIFICATIONS

項目	内容
Rated voltage range	-
Current consumption	100 mA or less
Net weight	100 g approx.

回到頁首

相關產品(附屬品)

回到頁首