AFPRP2Y04R | FP7 PHLS(遠程I/O)模組

詳細規格 2023年9月29日的資訊

項目	內容
品名	AFPRP2Y04R
型號	AFPRP2Y04R

COMMUNICATION SPECIFICATIONS (Common)

項目	内容
Communication method	Two-wire system half duplex
Insulation method	Pulse transformer insulation
Communication speed	6 Mbps / 12 Mbps
Synchronous method	Bit synchronization
Error check	CRC-12
Communication distance	Total length 200 m 656 ft (at 6 Mbps) / 100 m 328 ft (at 12 Mbps) (Note) Performance when the recommended cable is used Use of the recommended cable is necessary to achieve the maximum transmission distance and number of slave units.
Connection method	Multi-drop method
Impedance	100 Ohm
Terminator	Mounted on unit
External interface	Connector-type terminal block

INPUT SIDE SPECIFICATIONS

項目	内容
Insulation method	Non-isolated
Rated input voltage	24 V DC
Rated input current	4.3 mA approx.
Input impedance	5.6 kOhm approx.
Min. ON voltage / Min. ON current	17 V / 2 mA
Max. OFF voltage / Max. OFF current	5 V / 0.5 mA
Response time:OFF→ON	1 ms or less
Response time:ON→OFF	1 ms or less

OUTPUT SIDE SPECIFICATIONS (Relay)

項目	内容
Insulation method	Relay insulation
Rated control capacity	1 A 250 V AC (2 A/common) 1 A 30 V DC (2 A/common)
Min. load	0.1 mA 100 mV (resistive load)
Response time:OFF→ON	10 ms or less
Response time:ON→OFF	5 ms or less
Life time:Mechanical life	2 x 10 7 operations or more
Life time:Electrical life	1 x 10 5 operations or more (switching frequency: 20 times/minute)
Surge absorber	None
Short circuit protection	None

COMMON GENERAL SPECIFICATIONS

項目	内容
Ambient temperature	0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance	147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
Operating condition	Free from corrosive gasses and excessive dust

INDIVIDUAL GENERAL SPECIFICATIONS

項目	内容
Rated voltage range	20.4 to 28.8 V DC
Current consumption	85 mA or less
Net weight	75 g approx.

回到頁首

回到頁首