AFPRP2Y16T | FP7 PHLS(遠程I/O)模組

截至2024年04月28日
為了改善本產品，會有在未事先通知的情況下變更本產品的規格及設計的情況。

詳細規格

項目	內容
品名	AFPRP2Y16T
型號	AFPRP2Y16T

COMMUNICATION SPECIFICATIONS (Common)

項目	内容
Communication method	Two-wire system half duplex
Insulation method	Pulse transformer insulation
Communication speed	6 Mbps / 12 Mbps
Synchronous method	Bit synchronization
Error check	CRC-12
Communication distance	Total length 200 m 656 ft (at 6 Mbps) / 100 m 328 ft (at 12 Mbps) (Note) Performance when the recommended cable is used Use of the recommended cable is necessary to achieve the maximum transmission distance and number of slave units.
Connection method	Multi-drop method
Impedance	100 Ohm
Terminator	Mounted on unit
External interface	Connector-type terminal block

INPUT SIDE SPECIFICATIONS

項目	内容
Insulation method	Non-isolated
Rated input voltage	24 V DC
Rated input current	4.3 mA approx.
Input impedance	5.6 kOhm approx.
Min. ON voltage / Min. ON current	17 V / 2 mA
Max. OFF voltage / Max. OFF current	5 V / 0.5 mA
Response time:OFF→ON	1 ms or less
Response time:ON→OFF	1 ms or less

OUTPUT SIDE SPECIFICATIONS (Except relay)

項目	内容
Insulation method	Non-isolated
Output type	Sink type (Open collector output)
Rated load voltage	20.4 to 28.8 V DC
Max. control capacity	0.1 A/point
Max. surge current	0.5 A
OFF state leakage current	0.1 mA or less
ON state maximum voltage drop	0.5 V or less
Response time:OFF→ON	0.05 ms or less
Response time:ON→OFF	0.5 ms or less
Surge absorber	Zener diode
Short circuit protection	None

COMMON GENERAL SPECIFICATIONS

項目	内容
Ambient temperature	0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance	147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
Operating condition	Free from corrosive gasses and excessive dust

INDIVIDUAL GENERAL SPECIFICATIONS

項目	内容
Rated voltage range	20.4 to 28.8 V DC
Current consumption	40 mA or less
Net weight	75 g approx.

回到頁首

回到頁首