FX-311BP | 手動設定型光纖傳感器 FX-311

  • 列印此頁面

手動設定型光纖傳感器 FX-311

※產品實際尺寸以實物為準

  • RoHS対応 適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質 　

品名 FX-311BP
型號 FX-311BP
產品 Manually Set Fiber Sensor
詳細 PNP output
產品名稱 手動設定型光纖傳感器 FX-311

截至2024年05月09日
為了改善本產品，會有在未事先通知的情況下變更本產品的規格及設計的情況。

詳細規格

項目 內容
品名 FX-311BP
型號 FX-311BP
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power consumption 840 mW or less (Current consumption 35 mA or less at 24 V supply voltage)
Output PNP open-collector transistor
• Maximum source current: 100 mA(50 mA, if five, or more, amplifiers are connected in cascade)
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less[at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
Output:Output operation Selectable either Light-ON or Dark-ON, with selection switch
Output:Short-circuit protection Incorporated
Response time 150 μs or less (FAST), 250 μs or less (STD), 2 ms or less (LONG) selectable with selection switch
Operation indicator Orange LED (lights up when the output is ON)
Stability indicator Green LED (lights up under stable light received condition or stable dark condition)
Sensitivity adjuster 12-turn potentiometer with indicator (Pointer part: red backlight)
(Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted.
Timer function Incorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective
Automatic interference prevention function Incorporated (Up to 4 sets of fiber heads can be mounted close together.)
(Note):When the power supply is switched on, the emission timing are automatically set for interference prevention.
Ambient temperature -10 to +55 ℃ -14 to +131 ℉
(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed)
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 ℓx at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
Vibration resistance 10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each
Shock resistance 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
Emitting element (modulated) Blue LED
Emitting element (modulated):Peak emission wavelength 470 nm 0.019 mil
Material Enclosure: Heat-resistant ABS, Case cover: Polycarbonate
Connection method Connector
(Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft)
Cable length Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Weight Net weight: 15 g approx., Gross weight: 20 g approx.

回到頁首

相關產品(附屬品)

電線
品名 CN-71-C1
型號 CN-71-C1
產品 Quick-connection cables
詳細 Sub cable(1-core)
產品名稱 電線
電線
品名 CN-71-C2
型號 CN-71-C2
產品 Quick-connection cables
詳細 Sub cable(1-core)
產品名稱 電線
電線
品名 CN-71-C5
型號 CN-71-C5
產品 Quick-connection cables
詳細 Sub cable(1-core)
產品名稱 電線


打開/關閉




回到頁首

電話問詢
(02)2757-1808 授理時間 9:00-17:30(除敝司休假日)

回到頁首

關於產品的諮詢
技術諮詢窗口

(02)2757-1808

授理時間 9:00-17:30
(除午休時間11:50-12:50,敝司休假日)

訂購／使用時的注意事項（FA感測器・系統〔馬達以外〕）
訂購／使用時的注意事項（產業馬達專用）