[Notification of CAD Data Download Issue]
We regret to inform you that we are currently experiencing issues with downloading CAD data for some products.
We are investigating the cause of this problem. We apologize for any inconvenience this may cause and appreciate your understanding.
企業專屬首頁
> 電子元件／工業用機器
> 制御機器首頁
> FA 感測器／系統
> 感測器
> 光纖感測器
> 顏色檢測光纖傳感器 FZ-10
> 品名
> FZ-11P
FZ-11P | 顏色檢測光纖傳感器 FZ-10
截至2024年05月19日
為了改善本產品，會有在未事先通知的情況下變更本產品的規格及設計的情況。
詳細規格
| 項目 | 內容 |
|---|---|
| 品名 | FZ-11P |
| 型號 | FZ-11P |
| CE marking directive compliance | EMC Directive, RoHS Directive |
| Applicable fibers | FD-L51, FD-L52, FD-L53, FD-L54 |
| Supply voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Current consumption | 45 mA or less |
| Sensing object | Opaque or translucent object larger than the spot diameter of the applicable fiber (Note) Make sure to confirm detection with an actual sensor before use. |
| Output | PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Output:Utilization category | DC-12 or DC-13 |
| Output:Output operation | Switchable either Coincident-ON or Incoincident-ON |
| Output:Short-circuit protection | Incorporated |
| Response time | 1 ms or less (3 ms or less when auto-teaching has been engaged) |
| Indicators | Power indicator: Green LED (lights up when the power is ON, blinks during auto-teaching) Operation indicator: Red LED (lights up when the output is ON) * Both blink alternately when a manual teaching error occurs Both blink simultaneously when the output is short-circuited |
| Timer function | Approx. 40 ms fixed OFF-delay timer (switchable either effective or ineffective) |
| Teaching | Button operation, Switchable either manual-teaching or auto-teaching |
| Tolerance | Adjustable in 16 grades with the tolerance adjuster |
| Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed) (Note) , Storage: -20 to +70 ℃ -4 to +158 ℉ (Note) The amplifier should be used under the ambient temperature of +15 to +35 ℃ +59 to +95 ℉ when the tolerance adjuster is set from the 1st grade to the 4th grade, which provide fine color resolution. |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure (Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Insulation resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
| Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each |
| Emitting element | Red LED / Green LED / Blue LED (Peak emission wavelength: 644 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil, modulated) |
| Material | Enclosure: ABS Case cover: Polycarbonate Fiber lock lever: PPS |
| Cable | 0.2 mm2 3-core cabtyre cable, 2 m 328.084 ft long |
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| Weight | Net weight: 85 g approx. |
| Accessory | MS-DIN-3 (Amplifier mounting bracket): 1 pc. Adjusting screwdriver: 1 pc. |
- (02)2757-1808 授理時間 9:00-17:30(除敝司休假日)
