企業專屬首頁 > 電子元件/工業用機器 > 制御機器首頁 > FA 感測器/系統 > 檢查‧判別‧測量用感測器 > 檢查‧判別‧測量用感測器 > 接觸式數位位移感測器 HG-S > 品名 > HG-S1110R
品名 | HG-S1110R |
型號 | HG-S1110R |
產品 | Contact-Type Digital Displacement Sensor |
詳細 | 10 mm 0.394 in type High precision Low measuring force type |
產品名稱 | 接觸式數位位移感測器 HG-S |
截至2024年05月04日
為了改善本產品,會有在未事先通知的情況下變更本產品的規格及設計的情況。
項目 | 內容 |
---|---|
品名 | HG-S1110R |
型號 | HG-S1110R |
Regulatory compliance | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
Applicable controller | HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113 |
Position detection method | Optical absolute linear encoder method |
Measuring range | 10 mm 0.394 in |
Stroke | 10.5 mm 0.413 in or more |
Measuring force : Downward mount | 0.35 N or less 0.30 N (Note 1): In the case of low measurement force type (HG-S1010R / HG-S1110R), measurements were obtained with products in standard configuration without rubber bellows. (Note 2): Typical value near center of measurement. |
Measuring force : Upward mount | - |
Measuring force : Side mount | 0.25 N or less 0.20 N (Note 1): In the case of low measurement force type (HG-S1010R / HG-S1110R), measurements were obtained with products in standard configuration without rubber bellows. (Note 2): Typical value near center of measurement. |
Resolution | 0.1 μm 0.004 mil |
Sampling rate | 1ms |
Indication accuracy(P-P) | Full range: 1.0 μm 0.039 mil or less Narrow range: 0.5 μm 0.020 mil or less (any 60 μm 2.362 mil) |
Tip deviation amount | 35 μm 1.378 mil (typical)(Note):Linearity F.S. = 16 mA, and is linearity with respect to digitally measured values. |
Hot swap function | Incorporated |
Operation indicator | 2-color LED (Orange / Green) |
Pollution degree | 2 |
Operating altitude | 2,000 m 6561.68 ft or less (Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
Environmental resistance : Protection | - |
Environmental resistance : Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No condensation or icing), Storage: -20 to +60 ℃ -4 to +140 ℉ |
Environmental resistance : Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Insulation resistance | 100 MΩ or more at 250 V DC |
Environmental resistance : Vibration resistance | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each |
Environmental resistance : Shock resistance | 1,960 m/s2acceleration in X, Y and Z directions three times each |
Grounding method | Capacitor grounding |
Material | Body: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe※: Brass (body) / Ceramic (ball), Rubber bellows: NBR (black) ※The probes (optional) are also available. |
Weight | Net weight: 80 g approx. |
Accessory | Low measuring force type (HG-S1010R / HG-S1110R): Sensor head fastening wrench 1 pc., Mounting nut 1 pc., Rubber bellows 1 pc. |
Remark | Where measurement conditions have not been specified precisely, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature +20 ℃ +68 ℉, and a clean atmosphere where dust and liquids such as water and oil do not come in contact with the equipment. |
品名 | CN-HS-C10 |
型號 | CN-HS-C10 |
產品名稱 | 連接電線 |
品名 | CN-HS-C10L |
型號 | CN-HS-C10L |
產品名稱 | 連接電線 |
品名 | CN-HS-C20 |
型號 | CN-HS-C20 |
產品名稱 | 連接電線 |