[Notification of CAD Data Download Issue]
We regret to inform you that we are currently experiencing issues with downloading CAD data for some products.
We are investigating the cause of this problem. We apologize for any inconvenience this may cause and appreciate your understanding.
企業專屬首頁 > 電子元件/工業用機器 > 制御機器首頁 > FA 感測器/系統 > 感測器 > 光電感測器‧雷射感測器 > 放大器分離型 數位雷射感測器 LS-500 > 品名 > LS-501-C2
品名 | LS-501-C2 |
型號 | LS-501-C2 |
產品 | Amplifier-separated Type Digital Laser Sensor |
詳細 | Amplifiers(Cable type) |
產品名稱 | 放大器分離型 數位雷射感測器 LS-500 |
截至2024年05月19日
為了改善本產品,會有在未事先通知的情況下變更本產品的規格及設計的情況。
項目 | 內容 |
---|---|
品名 | LS-501-C2 |
型號 | LS-501-C2 |
Regulatory compliance | EMC Directive, RoHS Directive |
Operation indicator | Orange LED (lights up when sensing output 1 or sensing output 2 is ON) |
Protection | IP40(IEC) |
Ambient temperature | -10 to +55degrees + 14 to 131 degrees Fahrenheit (If 4 to 7 units are mounted close together, -10 to +50 degrees +14 to +122 degrees Fahrenheit ; if 8 to 12 units are mounted close together, -10 to +45 degrees +14 to +113 degrees Fahrenheit )(No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Insulation resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in (max. 10 G) amplitude in X, Y and Z directions for two hours each |
Shock resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each |
Material | Enclosure: Polycarbonate Cover: Polycarbonate Switch: Polyacetal |
Cable | 0.2mm2 6-core cabtyre cable, 2 m 6.562 ft long |
Weight | Net weight: 75 g approx. Gross weight: 110 g approx. |
Accessory | FX-MB1 (Amplifier protective seal): 1 set |
Supply voltage | 12 to 24 V DC +10-15% Ripple P-P 10 % or less |
Power consumption | Normal operation: 1,200 mW or less (Current consumption 50 mA or less at 24 V supply voltage,excluding monitor current output) ECO mode: 980 mW or less (Current consumption 40 mA or less at 24 V supply voltage,excluding monitor current output) |
Sensing outputs (Sensing output 1, 2) | NPN open-collector transistor ・Maximum sink current: 50 mA (Note:25 mA if 5 or more amplifier are connected in cascade (excluding cable extension).) ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at max. sink current) (Note:Select either sensing output 2 or external input as the connector type.) |
Sensing outputs (Sensing output 1, 2):Output operation | Selectable either Light-ON or Dark-ON |
Sensing outputs (Sensing output 1, 2):Short-circuit protection | Incorporated |
Sensing output setting:Sensing output 1 | Normal mode, differential mode, hysteresis mode, window comparator mode, selectable |
Sensing output setting:Sensing output 2 | Normal mode, differential mode, hysteresis mode, self-diagnostic output mode, answer-back output mode, selectable (Note:Select either sensing output 2 or external input.) |
Response time | H-SP: 60 micro s or less, FAST: 150 micro s or less, STD: 250 micro s or less, LONG: 500 micro s or less, U-LG: 5 ms or less, HYPR: 24 ms or less selectable |
Monitor current output | Output current: Approx. 4 to 20 mA (H-SP, FAST, STD: at 0 to 4,000 indication) Response time: 2 ms or less Zero point: 4 mA plus or minus 1 % F.S. Span: 16 mA plus or minus 5 % F.S. Linearity: plus or minus 3 % F.S. Load resistance: 0 to 250 Ohm |
External input | NPN non-contact input - Signal condition High: +8 V to +V DC or open, Low: 0 to +2 V DC (source current 0.5 mA or less) - Input impedance: 10 kOhm approx.(Note:Select either sensing output 2 or external input.) |
External input function | Laser emission halt / teaching (full-auto teaching, limit teaching, 2 point teaching) / logic operation setting / copy lock /display adjustment / data bank load / data bank save, selectable |
Laser emission indicator | Green LED (lights up during laser emission) |
Output select indicator | Yellow LED (lights up when output is selected) |
Digital display | 8-digit 7-segment digital display (4-digit green LED + 4-digit red LED), MODE indicator (Yellow LED): L/D, CUST, PRO |
Incident light indication range | H-SP/FAST/STD: 0 to 4,000 LONG/U-LG/HYPR: 0 to 9,999 |
Sensitivity setting | 2-level teaching / limit teaching / full auto teaching / manual adjustment |
Logical operation | Between sensing output 1 and calculation target: Disabled / and / or / xor, selectable Calculation target: Sensing output 2 / adjacent upstream amplifier (sensing output 1) / external input, selectable |
Timer function | OFF-delay timer, ON-delay timer, ONE-SHOT timer, ON / OFF-delay timer, ON-delay / ONE-SHOT timer, switchable either effective of ineffective, with variable timer period OFF-delay timer, ON-delay timer, ONE-SHOT timer, switchable either effective of ineffective, with variable timer period |
Timer function:Time | Timer range '' ms'': 0.5 ms approx., 1 to 9,999 ms approx., in approx. 1 ms intervals Timer range '' sec'': 0.5 sec. approx., 1 to 32 sec. approx., in approx. 1 sec. intervals Timer range '' 1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., in approx. 0.1 ms intervals, Set separately for each output. |
Automatic interference prevention function | Incorporated (Note:Number of units that can be mounted close together: 0 for H-SP; 2 for FAST; 4 for STD, LONG, U-LG, or HYPR) |
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3mm2, or more, cable. |
品名 | SC-GU3-01 |
型號 | SC-GU3-01 |
產品 | Commnunication Unit for Open Network |
詳細 | Communication unit for CC-Link |
產品名稱 | 開放式匯流排對應通信模組 SC-GU3 |