NA40-8 | 40mm光軸間距通用區域感測器 NA40(已停產)

詳細規格 2023年9月29日的資訊

項目	內容
品名	NA40-8
型號	NA40-8
Sensing height	280 mm 11.024 in
Sensing range	5 m 16.404 ft
Beam pitch	40 mm 1.575 in
Sensing object	ø60 mm ø2.362 in or more opaque object
Supply voltage	12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption	Emitter: 30 mA or less Receiver: 60 mA or less
Sensing output	NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between sensing output and 0 V) • Residual voltage: 1.6 V or less (at 100 mA sink current)
Sensing output:Output operation	ON when all beam channels are received / OFF when one or more beam channels are interrupted
Sensing output:Short-circuit protection	Incorporated
Self-diagnosis output	NPN open-collector transistor • Maximum sink current: 50 mA • Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V) • Residual voltage: 1.6 V or less (at 50 mA sink current)
Self-diagnosis output:Output operation	OFF when unstable light received condition continues for 5 sec. or more, or the output transistor fails
Self-diagnosis output:Short-circuit protection	Incorporated
Response time	12 ms or less
Indicator	Incorporated with the three color indicators on the receiver • Sensing output operation indicator: Red LED (lights up when one or more beam channels are interrupted) • Stable incident beam indicator: Green LED (lights up when all beam channels are received stably) • Unstable incident beam indicator: Yellow LED (lights up when one or more beam channels are received unstably) * When the output transistor fails, the three color indicators blink simultaneously.
Interference prevention function	Incorporated (Two units of sensors can be mounted close together.)
Protection	IP65 (IEC)
Ambient temperature	–10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: –10 to +60 ℃ +14 to +140 ℉
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance	Incandescent light: 3,500 ℓx or less at the light-receiving face
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance	100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Emitting element	Infrared LED (synchronized scanning system)
Material	Protection enclosure: Aluminum Unit case: ABS Front cover: Acrylic Lens: Acrylic
Cable	0.5 mm2 4-core (emitter: 3-core) cabtyre cable, 0.5 m 1.640 ft long, with a round connector at the end * Use together with the optional mating cable
Cable extension	Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.5 mm2, or more, cable. (However, the interference prevention wire can extend up to 20 m 65.617 ft between two emitters.)
Weight(Total weight of emitter and receiver)	630 g approx.
Accessories	MS-NA40-1 (Sensor mounting bracket): 1 set for emitter and receiver Adjusting screwdriver: 1 pc.

回到頁首