RX-LS200 | 距離設定反射型光電感測器[放大器內藏] RX-LS200(已停產)

詳細規格 2022年9月30日的資訊

項目	內容
品名	RX-LS200
型號	RX-LS200
Regulatory compliance	EMC Directive, RoHS Directive
Sensing range	50 to 200 mm 1.969 to 7.874 in with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
Hysteresis	10 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
Repeatability	Along sensing axis: 1 mm 0.039 in or less Perpendicular to sensing axis: 0.5 mm 0.020 in or less
Supply voltage	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption	40 mA or less
Output	NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Output:Utilization category	DC-12 or DC-13
Output:Output operation	Switchable either Light-ON or Dark-ON
Output:Short-circuit protection	Incorporated
Response time	1 ms or less
Operation indicator	Red LED (lights up when the output is ON)
Stability indicator	Green LED (lights up under stable light received condition or stable dark condition)
Distance adjuster	2-turn mechanical adjuster
Pollution degree	3 (Industrial environment)
Protection	IP67 (IEC)
Ambient temperature	-25 to 60 degrees -13 to 140 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to 70 degrees -22 to 158 degrees Fahrenheit
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance	Incandescent light: 3,500 lx or less at the light-receiving face
EMC	EN 60947-5-2
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance	500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element	Infrared LED (peak emission wavelength: 880 nm 0.035mil, modulated)
Material	Enclosure: Die-cast zinc alloy Indicator cover: Polyethersulphone Lens: Polycarbonate
Cable	0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 3 m 9.843 ft long
Cable extension	Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Weight	Net weight: 85 g approx.
Accessory	MS-RX-1 (Sensor mounting bracket): 1 set Adjusting screwdriver: 1 pc

回到頁首