RX-M50-C5 | 壓鑄型光電感測器[放大器內藏] RX(已停產)

詳細規格 2022年9月30日的資訊

項目	內容
品名	RX-M50-C5
型號	RX-M50-C5
Regulatory compliance	EMC Directive, RoHS Directive
Sensing range	50 m 164.042 ft
Sensing object	dia. 10 mm dia. 0.394 in or more opaque object
Hysteresis	-
Repeatability(perpendicular to sensing axis)	0.5 mm 0.020 in or less
Supply voltage	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption	Emitter: 25 mA or less Receiver: 25 mA or less
Sensing output	NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between sensing output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Sensing output:Utilization category	DC-12 or DC-13
Sensing output:Output operation	Switchable either Light-ON or Dark-ON
Sensing output:Short-circuit protection	Incorporated
Self-diagnosis output	NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V) - Residual voltage: 1.5 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
Self-diagnosis output:Output operation	ON under unstable sensing condition
Self-diagnosis output:Short-circuit protection	-
Response time	1 ms or less
Test input (emission halt) function	Incorporated
Operation indicator	Red LED (lights up when the sensing output is ON)
Stability indicator	Green LED (lights up under stable light received condition or stable dark condition)
Emitting indicator	Red LED (lights up during beam emission)
Sensitivity adjuster	Continuously variable adjuster
Automatic Interference prevention function	-
Protection	IP67 (IEC)
Ambient temperature	-25 to +60 degrees -13 to +140 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance	Incandescent light: 3,500 Lx or less at the light-receiving face
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance	500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element (modulated)	Infrared LED
Emitting element (modulated):Peak emission wavelength	880 nm 0.035 mil
Material	Enclosure: Die-cast zinc alloy Indicator cover: Polyethersulphone Lens: Polycarbonate
Cable	Emitter: 0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 5 m 16.404 ft long Receiver: 0.15 mm2 4-core oil, heat and cold resistant cabtyre cable, 5 m 16.404 ft long
Cable extension	Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver).
Accessory	MS-RX-1 (Sensor mounting bracket): 1 set for emitter and receiver Adjusting screwdriver: 1 pc

回到頁首