RX2-D300 | 壓鑄型光電感測器[放大器內藏] RX(已停產)

詳細規格 2020年9月30日的資訊

項目	內容
品名	RX2-D300
型號	RX2-D300
Regulatory compliance	EMC Directive, RoHS Directive
Sensing range	300 mm 11.811 in (Note) The sensing range and the hysteresis of the specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
Sensing object	Opaque, translucent or transparent object (Note) Make sure to confirm detection with an actual sensor before use.
Hysteresis	15 % or less of operation distance (Note) The sensing range and the hysteresis of the specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
Repeatability(perpendicular to sensing axis)	0.5 mm 0.020 in or less
Supply voltage	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption	1 mA or less (Note) It is the leakage current when the output is in the OFF state.
Sensing output	Non contact DC 2-wire type - Load current: 5 to 100 mA - Residual voltage: 4 V or less (Note) (Note) When extending the cable, the residual voltage will be increased depending on the type of cable used. Verify the residual voltage when extending the cable.
Sensing output:Output operation	Switchable either Light-ON or Dark-ON
Sensing output:Short-circuit protection	Incorporated
Response time	3 ms or less
Operation indicator	Red LED (lights up when the output is ON)
Stability indicator	Green LED (Light-ON mode: lights up under stable light received condition, Dark-ON mode: lights up under stable dark condition)
Emitting indicator	-
Sensitivity adjuster	Continuously variable adjuster
Protection	IP67 (IEC)
Ambient temperature	-20 to +60 degrees -4 to +140 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance	Incandescent light: 3,500 Lx or less at the light-receiving face
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance	500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element	Infrared LED (modulated)
Emitting element:Peak emission wavelength	890 nm 0.035 mil
Material	Enclosure: Die-cast zinc alloy Indicator cover: Polyethersulphone Lens: Polycarbonate
Cable	0.15 mm2 2-core oil, heat and cold resistant cabtyre cable, 2 m 6.562 ft long
Cable extension	- (Note) When extending the cable, the residual voltage will be increased depending on the type of cable used. Verify the residual voltage when extending the cable.
Weight	70 g approx.
Accessory	MS-RX-1 (Sensor mounting bracket): 1 set Adjusting screwdriver: 1 pc

回到頁首