RX2-PRVM2-C5 | 壓鑄型光電感測器[放大器內藏] RX(已停產)

詳細規格 2020年9月30日的資訊

項目	內容
品名	RX2-PRVM2-C5
型號	RX2-PRVM2-C5
Regulatory compliance	EMC Directive, RoHS Directive
Sensing range	0.1 to 2 m 0.328 to 6.562 ft (Note) The sensing range and the sensing object are specified for the RF-230 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away.
Sensing object	dia. 50 mm dia. 1.969 in or more opaque, translucent or specular object (Note) The sensing range and the sensing object are specified for the RF-230 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away. (Note) Make sure to confirm detection with an actual sensor before use.
Hysteresis	-
Repeatability(perpendicular to sensing axis)	1 mm 0.039 in or less
Supply voltage	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption	1 mA or less (Note) It is the leakage current when the output is in the OFF state.
Sensing output	Non contact DC 2-wire type - Load current: 5 to 100 mA - Residual voltage: 4 V or less (Note) (Note) When extending the cable, the residual voltage will be increased depending on the type of cable used. Verify the residual voltage when extending the cable.
Sensing output:Output operation	Switchable either Light-ON or Dark-ON
Sensing output:Short-circuit protection	Incorporated
Response time	3 ms or less
Operation indicator	Red LED (lights up when the output is ON)
Stability indicator	Green LED (Light-ON mode: lights up under stable light received condition, Dark-ON mode: lights up under stable dark condition)
Emitting indicator	-
Sensitivity adjuster	Continuously variable adjuster
Protection	IP67 (IEC)
Ambient temperature	-20 to +60 degrees -4 to +140 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance	Incandescent light: 3,500 Lx or less at the light-receiving face
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance	500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element	Red LED (modulated)
Emitting element:Peak emission wavelength	680 nm 0.027 mil
Material	Enclosure: Die-cast zinc alloy Indicator cover: Polyethersulphone Lens: Acrylic
Cable	0.15 mm2 2-core oil, heat and cold resistant cabtyre cable, 5 m 16.404 ft long
Cable extension	- (Note) When extending the cable, the residual voltage will be increased depending on the type of cable used. Verify the residual voltage when extending the cable.
Accessory	MS-RX-1 (Sensor mounting bracket): 1 set RF-230 (Reflector): 1 pc Adjusting screwdriver: 1 pc

回到頁首

相關產品(附屬品) 2020年9月30日的資訊

回到頁首