SU-7 | 薄型・自動靈敏度設定光電感測器[放大器分離] SU-7/SH(已停產)

詳細規格 2023年6月30日的資訊

項目	內容
品名	SU-7
型號	SU-7
Applicable sensor head	SH series
Supply voltage	12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption	35 mA or less
Sensing output	<NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between sensing output and 0 V) ・Residual voltage: 1.0 V or less (at 100 mA sink current)         0.4 V or less (at 16 mA sink current)
Sensing output:Output operation	Selectable either Light-ON or Dark-ON with the ON and OFF buttons
Sensing output:Short-circuit protection	Incorporated
Self-diagnosis output	<NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V) ・Residual voltage: 1.0 V or less (at 50 mA sink current)         0.4 V or less (at 16 mA sink current)
Self-diagnosis output:Output operation	ON under unstable sensing condition (restored automatically after 40 ms approx.), or if the sensing output is short-circuited (restored when short-circuit is rectified). (For the remote sensitivity adjustment type, it turns ON for 40 ms approx. Also after the remote sensitivity input is received.)
Self-diagnosis output:Short-circuit protection	-
Response time	0.6 ms or less (0.8 ms or less when the interference prevention function is used)
Operation indicator	Red LED (lights up when the sensing output is ON)
Stability indicator	Green LED ("RUN" mode: Lights up under stable light received condition or stable dark condition "SET" mode: At the time of sensitivity setting, blinks twice when the difference between ON and OFF levels is greater than the hysteresis, but blinks 15 times when it is equal to or less than the hysteresis. Also blinks twice after the interference prevention is set "SET" mode → When "SIF" or "RUN" mode is selected: Blinks from 0 to 5 times according to the sensitivity margin)
Test input (emission halt) function	-
External synchronization function	-
Remote sensitivity setting function	-
Remote sensitivity selection function	-
Sensitivity shift & limit sensitivity setting functions	Shifts the set sensitivity level
Automatic interference prevention function	Incorporated
Timer function	ON-delay / OFF-delay timer (variable 0 to 5 sec.)
Ambient temperature	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance	100 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Material	Enclosure: Heat-resistant ABS, Case cover: Polycarbonate, Cable lock lever: PPS
Cable	0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long
Cable extension	Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Weight	Net weight: 65 g approx.
Accessory	MS-DIN-2 (Amplifier mounting bracket): 1 pc., SU-CT1 (Stripper): 1 pc.
Remark	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

回到頁首

相關產品(附屬品) 2023年6月30日的資訊

回到頁首