Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Timers / Counters / FA Componets > Fan Motors > DC Fan Motor 120 x 25t(ASFP1)
Discontinuation plan
|
|
|
UL/C-UL
, CE
, UKCA
Approved
Discontinued product | Recommended substitute | ||||
---|---|---|---|---|---|
Product number/Part number | Last time buy | Product number/Part number | Product name | Remark | |
Product number: ASFP10371 Part number: ASFP10371 |
September 29, 2023 To be discontinued |
Product number:- Part number:- |
- | Sorry, no suggested alternative products. | |
Product number: ASFP10372 Part number: ASFP10372 |
September 29, 2023 To be discontinued |
Product number:- Part number:- |
- | Sorry, no suggested alternative products. | |
Product number: ASFP12371 Part number: ASFP12371 |
September 29, 2023 To be discontinued |
Product number:- Part number:- |
- | Sorry, no suggested alternative products. | |
Product number: ASFP12372 Part number: ASFP12372 |
September 29, 2023 To be discontinued |
Product number:- Part number:- |
- | Sorry, no suggested alternative products. | |
Product number: ASFP14371 Part number: ASFP14371 |
September 29, 2023 To be discontinued |
Product number:- Part number:- |
- | Sorry, no suggested alternative products. | |
Product number: ASFP14372 Part number: ASFP14372 |
September 29, 2023 To be discontinued |
Product number:- Part number:- |
- | Sorry, no suggested alternative products. |
Part number | Rated voltage (V) |
Input power (W) max/AVE |
Rated current (mA) max/AVE |
Rotation speed (min-1) min/AVE |
Max. air flow (m3/min) min/AVE |
Max. static pressure (Pa) min/AVE |
Noise (dB) max/AVE |
Weight (g) |
---|---|---|---|---|---|---|---|---|
ASFP10371 | 12 | 4.56/2.88 | 380/240 | 2,300/2,500 | 2.26/2.58 | 39.5/48.0 | 42.0/37.0 | 165 |
ASFP10372 | 24 | 4.56/2.64 | 190/110 |
Note: 1 | Values above without designations are averages. |
---|---|
Note: 2 | Noise levels are based on measurements taken at a distance of 1 m from the front of the fan. |
Ambient temperature | -10℃ to +60℃ +14℉ to +140℉ | |
---|---|---|
Humidity resistance test condition | 85 ℃ 185 ℉, 95% RH, 240 hrs. | |
Temperature rise | Coil surface: Max. 50℃ 122℉ (Nominal voltage, by resistive method) Exterior:Max. 20℃ 68℉ (Nominal voltage, by thermocouple method) |
|
Breakdown voltage | 500 V AC for 1 min. (between lead wire and external housing) | |
Insulation resistance | Min. 10 MΩ (at 500 V DC) | |
Vibration resistance | Frequency | 10 to 55Hz |
Double amplitude width | 0.75mm | |
Applied direction | X, Y and Z directions | |
Applied time | 10 min. in each direction | |
Lead wire tensile strength | 9.8 N, single wires did not break at 15 seconds | |
Fan blockage | No coil burnout even after blockage of 72 hrs. at nominal voltage. | |
Reverse polarity power connection | No damage even after reverse polarity connection for short time at nominal voltage. | |
Expected life | 40,000 hours at 60 ℃ (Life time when continuously energized by applying the rated voltage Current value: + 15% or more Rotation speed: -15% or less) |
Frame | plastic |
---|---|
Propeller | plastic |
Bearings | ball bearings |
Lead wires | UL3385 and AWG26 |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)