Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Area Sensors > 20 mm Beam Pitch General Purpose Area Sensor SF1-N(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
Number of beam channels | 8 | 16 | 24 | 32 | |
---|---|---|---|---|---|
Model No. | SF1-N8 | SF1-N16 | SF1-N24 | SF1-N32 | |
With spatter protection hood | SF1-N8-H | SF1-N16-H | SF1-N24-H | NSF1-N32-H | |
Sensing height | 140mm | 300mm | 460mm | 620mm | |
Sensing range | 7m | ||||
Beam pitch | 20mm | ||||
Sensing object | ø30 mm or more opaque object (ø35 mm or more opaque object if the setting distance is less than 0.5 m.) | ||||
Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less | ||||
Current consumption | Emitter: 55 mA or less Receiver: 60 mA or less |
Emitter: 70 mA or less Receiver: 75 mA or less |
|||
Output | NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.6 V or less (at 100 mA sink current) |
||||
Output operation | ON when all beam channels are received / OFF when one or more beam channels are interrupted (OFF, also, when the sensor fails.) |
||||
Short-circuit protection | Incorporated | ||||
Response time | 12 ms or less | ||||
Indicators | Emitter | Emitting indicator: Green LED (lights up under normal emission, blinks under emitting circuit failure or on cable break between the synchronization and the external input terminals when interference prevention function is used (only the emitting indicator of the Sensor B blinks), and lights off under no emission) |
|||
Receiver | Operation indicator: Red LED (lights up when one or more beam channels are interrupted, and blinks when extraneous light is received) Stable incident beam indicator: Green LED (lights up when all beam channels are received stably) Unstable incident beam indicator: Yellow LED (lights up when one or more beam channels are received unstably) * The three color indicators blink in rotation when the receiving circuit fails, and blink simultaneously when the output circuit fails. The operation indicator and the unstable incident beam indicator blink alternately when the synchronization wire breaks or the emitting circuit fails. |
||||
Test input (emission halt) function | Incorporated | ||||
Interference prevention function | Incorporated (Two units of sensors can be mounted close together.) | ||||
Environmental resistance |
Protection | IP65 (IEC) | |||
Ambient temperature | -10 to +55 ℃ (No dew condensation or icing allowed), Storage: -10 to +60 ℃ | ||||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||||
Ambient illuminance | Sunlight: 20,000 lx at the light-receiving face, Incandescent light: 3,500 lx at the light-receiving face |
||||
Noise immunity | Power line: 240 Vp, 10ms cycle, and 0.5 μs pulse width Radiation: 300 Vp, 10ms cycle, and 0.5 μs pulse width (with noise simulator) |
||||
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | ||||
Insulation resistance | 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure | ||||
Vibration resistance | 10 to 55 Hz frequency, 1.5 mm amplitude in X, Y and Z directions for two hours each | ||||
Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions for three times each | ||||
Emitting element | Infrared LED (modulated) | ||||
Material | Protection enclosure: Aluminum, Unit case: ABS, Front cover: Acrylic, Lens: Acrylic | ||||
Cable | 0.5 mm2 4-core cabtyre cable, 0.5 m long with a round connector at the end * Use together with the optional mating cable |
||||
Cable extension | Extension up to total 20 m is possible, for both emitter and receiver, with 0.5 mm2, or more, cable. | ||||
Weight (Total of emitter and receiver) |
500 g approx. | 840 g approx. | 1,170 g approx. | 1,500 g approx. | |
With spatter protection hood | 630 g approx. | 1,080 g approx. | 1,530 g approx. | 1,990 g approx. | |
Accessory | MS-SF1-1 (Sensor mounting bracket): 1 set for emitter and receiver |
Number of beam channels | 40 | 48 | 56 | 64 | |
---|---|---|---|---|---|
Model No. | SF1-N40 | SF1-N48 | SF1-N56 | SF1-N64 | |
With spatter protection hood | SF1-N40-H | SF1-N48-H | SF1-N56-H | SF1-N64-H | |
Sensing height | 780 mm | 940 mm | 1,100 mm | 1,260 mm | |
Sensing range | 7m | ||||
Beam pitch | 20mm | ||||
Sensing object | ø30 mm or more opaque object (ø35 mm or more opaque object if the setting distance is less than 0.5 m.) | ||||
Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less | ||||
Current consumption | Emitter: 85 mA or less Receiver: 90 mA or less |
Emitter: 100 mA or less Receiver: 105 mA or less |
|||
Output | NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.6 V or less (at 100 mA sink current) |
||||
Output operation | ON when all beam channels are received / OFF when one or more beam channels are interrupted (OFF, also, when the sensor fails.) |
||||
Short-circuit protection | Incorporated | ||||
Response time | 12 ms or less | ||||
Indicators | Emitter | Emitting indicator: Green LED (lights up under normal emission, blinks under emitting circuit failure or on cable break between the synchronization and the external input terminals when interference prevention function is used (only the emitting indicator of the Sensor B blinks), and lights off under no emission) |
|||
Receiver | Operation indicator: Red LED (lights up when one or more beam channels are interrupted, and blinks when extraneous light is received) Stable incident beam indicator: Green LED (lights up when all beam channels are received stably) Unstable incident beam indicator: Yellow LED (lights up when one or more beam channels are received unstably) * The three color indicators blink in rotation when the receiving circuit fails, and blink simultaneously when the output circuit fails. The operation indicator and the unstable incident beam indicator blink alternately when the synchronization wire breaks or the emitting circuit fails. |
||||
Test input (emission halt) function | Incorporated | ||||
Interference prevention function | Incorporated (Two units of sensors can be mounted close together.) | ||||
Environmental resistance |
Protection | IP65 (IEC) | |||
Ambient temperature | -10 to +55 ℃ (No dew condensation or icing allowed), Storage: -10 to +60 ℃ | ||||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||||
Ambient illuminance | Sunlight: 20,000 lx at the light-receiving face, Incandescent light: 3,500 lx at the light-receiving face |
||||
Noise immunity | Power line: 240 Vp, 10ms cycle, and 0.5 μs pulse width Radiation: 300 Vp, 10ms cycle, and 0.5 μs pulse width (with noise simulator) |
||||
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | ||||
Insulation resistance | 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure | ||||
Vibration resistance | 10 to 55 Hz frequency, 1.5 mm amplitude in X, Y and Z directions for two hours each | ||||
Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions for three times each | ||||
Emitting element | Infrared LED (modulated) | ||||
Material | Protection enclosure: Aluminum, Unit case: ABS, Front cover: Acrylic, Lens: Acrylic | ||||
Cable | 0.5 mm2 4-core cabtyre cable, 0.5 m long with a round connector at the end * Use together with the optional mating cable |
||||
Cable extension | Extension up to total 20 m is possible, for both emitter and receiver, with 0.5 mm2, or more, cable. | ||||
Weight (Total of emitter and receiver) |
1,830 g approx. | 2,170 g approx. | 2,500 g approx. | 2,830 g approx. | |
With spatter protection hood | 2,440 g approx. | 2,900 g approx. | 3,350 g approx. | 3,800 g approx. | |
Accessory | MS-SF1-1 (Sensor mounting bracket): 1 set for emitter and receiver |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)