Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Sensor Options > High-functional Digital Panel Controller CA(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
Type | Relay output | Transistor output | ||
---|---|---|---|---|
With BCD output | ||||
Basic model No. | CA-R□ | CA-T□ | CA-B□ | |
Supply voltage | 100 to 240 V AC ± 10 % | |||
Power consumption | 17 VA or less | |||
Power supply for sensor | 12V DC +10/0%、150mA | |||
Analog input | Input range | CA-□1 : 4 to 20 mA, CA-□2 : 1 to 5 V, CA-□3 : ±1 V, CA-□4 : ±5 V, CA-□5 : ±10 V |
||
Input impedance | Current input: 20 Ω, Voltage input: 1 MΩ (CA-□3: 100 kΩ) | |||
No. of inputs | 2 Nos. | |||
Input method | Single end | Floating | ||
A/D conversion method | Successive approximation method | |||
Sampling period | 1 ms or more (1,000 times/sec. max.) | |||
Switching inputs (Process number selection, External synchronization, Zero-adjustment, Reset, Auto-reference, Hold) |
Operation: Negative logic Signal condition: 5 V-CMOS · LSTTL compatible |
|||
Comparative outputs (HH, HI, GO, LO and LL) |
Relay contact 1a (HH, HI, LO and LL) Relay contact 1c (GO) ・Switching capacity: 250 V 1 A AC (resistive load) 30 V 1 A DC (resistive load) ・Electrical life: 100,000 switching operations or more (switching frequency 1,800 operations/hour) ・Mechanical life: 50 million switching operations or more (Switching frequency 18,000 operations/hour) |
NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 35 V DC or less (between comparative output and COM.) ・Residual voltage: 1 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) |
||
Response time | 10 ms or less | 1ms or less | ||
Data outputs (A0 to D3, POL, DTV, OR) |
- |
- | BCD 4 digits, negative logic NPN open-collector transistor ・Maximum sink current: 70mA ・Applied voltage: 35 V DC or less (between data output and GND) ・Residual voltage: 1 V or less (at 70 mA sink current) 0.4 V or less (at 16 mA sink current) |
|
Measurement value display | 3 5/6 digit LED display (letter height: 14.2 mm 0.559 in) | |||
Display refresh rate | Selectable from 0.2, 0.5, 1, 2.5, 10 or 20 times/sec. | |||
Display range | –5999 to +5999 ("+" is not displayed) | |||
Display accuracy | ± (0.1 % rdg + 2 digits) at +23 ± 5 ℃ +73.4 ± 41 ℉ | |||
Temperature characteristics | ±100ppmF.S./℃ | |||
Threshold value display | 3 5/6 digit LED display (letter height: 8 mm 0.315 in) | |||
Display range | –5999 to +5999 ("+" is not displayed) | |||
Process number display | 1 digit LED display (letter height: 8 mm 0.315 in) | |||
Display range | 0 to 7 | |||
Main functions | Process number selection, arithmetic, hold, scaling, auto-reference, power supply ON-delay, start delay, hysteresis setting, etc. |
|||
Ambient temperature | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation), strage: –20 to +70 ℃ –4 to +158 ℉ | |||
Material | Enclosure: ABS | |||
Connecting method |
Screw-on terminal block [BCD output type: Screw-on terminal block and connector (Note 2)] | |||
Weight | Net weight: 500 g approx. | |||
Dimensions | W96 x H48 x D145.2 mm W3.780 x H1.890 x D5.717 in | |||
Accessory | Unit seal: 1 set |
(Note 1) : | Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉. |
---|---|
(Note 2) : | Purchase the mating connector for the BCD output type separately. Recommended mating connector: HIF3BA-34D-2.54R (Manufactured by Hirose Electric CO., LTD.) |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)