Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Fiber Sensors > Bank Selection Unit FX-CH > Specifications

Bank Selection Unit FX-CH

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Specifications

Specifications

Type	NPN input	PNP input
Model No.	FX-CH	FX-CH-P
Applicable sensors	FX-301B/G/H(P), LS-401(P)
Supply voltage	12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption	25 mA or less (When all indicators light up)
Bank selection input	Low: 0 to 2 V DC (Source current: 0.5 mA Input impedance: 10 kΩ approx.) High: 5 V to +V DC, or open	High: 4 V to +V DC (Sink current: 0.5 to 3 mA Input impedance: 10 kΩ approx.) Low: 0 to 0.6 V DC, or open
Power indicator	Green LED (Lights up when the power is ON)
Transmission operation indicator	Green LED (Lights up when loaded, blinks → lights up when saved)
Pollution degree	3 (Industrial environment)
Ambient temperature	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –20 to +70 ℃ –4 to +158 ℉
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
EMC	EN 61000-6-2, EN 61000-6-4
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each
Shock resistance	98 m/s² acceleration (10 G approx.) in X, Y and Z directions for fi ve times each
Material	Enclosure: Heat-resistant ABS
Connecting method	Connector (Note 2)
Cable length	Total length up to 100 m 328.084 ft is possible with 0.3 mm², or more, cable.
Weight	Net weight: 20 g approx., Gross weight: 25 g approx.
Dimensions	W10 x H27 x D64.5 mm W0.394 x H1.063 x D2.539 in
Accessory	SL-CP1 (4-pin type snap male connector): 1 pc.

Note 1 : Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.

Note 2 : The cable for FX-CH(-P) connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3 core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)

Note 3 : Make sure that FX-CH(-P) should be mounted to a 35 mm 1.378 in width DIN rail.

Note 1 :	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
Note 2 :	The cable for FX-CH(-P) connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below. Main cable (3 core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Note 3 :	Make sure that FX-CH(-P) should be mounted to a 35 mm 1.378 in width DIN rail.