Small Spot Fiber (Lens for reflective type fiber)
Sensing of minute objects can be performed by combining the fiber and spot lens.
Features
■ Sensing of minute objects can be performed by combining the fiber and spot lens.
The spot diameter can also be changed.
Applications
Packing detection |
 |
|
|
Number of IC pins checking |
 |
|
|
Discrimination of 0603 chip direction |
 |
|
|
Featuring an extensive selection of spot diameters and the ability to save space when used with square head fiber
Products accommodate a variety of target objects with different shapes, colors, and surface characteristics.
About 3 times more light received (compared to convertional models) [Finest spot lens FX-MR7]
|
Since there is a large difference in the amount of light received in applications such as direction detection, it is easy to set a threshold that will allow stable detection.
Additionally, these products offer an S/N ratio that is 1.3 times better than previous models.
|
Typical FX-501 performance (STD mode)
|
White |
Black |
FX-MR7 + FD-R33EG |
3,200 digits |
1,030 digits |
FX-MR6 (compared to previous models)
+ FD-R33EG |
1,000 digits |
435 digits |
Variable spot diameter [Zoom lens FX-MR8]
|
Spot diameters ranging from ø0.4 to ø3.5 mm ø0.016 to ø0.138 in can be achieved by combining the lens with a variety of fibers.
|
Long-range parallel light [Parallel light lens FX-MR9]
|
Depending on the fiber with which it is used, this lens creates parallel light with a spot diameter of approximately ø4 mm ø0.157 in at a sensing range of 0 to 30 mm 0 to 1.181 in.
|
Tightening torque 5 times (compared to convertional models) [FX-MR7/MR8/MR9]
The standard aluminum body has been changed to stainless steel (SUS 303) to reduce the likelihood of damage from over-tightening.
Standard lens outer diameter of ø4.3 mm (ø0.169 in) [FX-MR7/MR8/MR9]
Use of the same mounting hardware across the product line means less inventory and lower costs.
Introducing a tough fiber that transcends common knowledge!
It has toughness that can be used in moving parts, toughness that can be bent with precision,and high-quality for all purposes. It changes common knowledge about fibers. |
 |
* Bending radius: R10 mm R0.394 in, Reciprocating bending: 180° |
|
Return to top
Return to top