Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Micro Photoelectric Sensors > Amplifier Built-in / U-shaped Micro Photoelectric Sensor [Compact / Connector built-in type] PM-65 > Specifications

Amplifier Built-in / U-shaped Micro Photoelectric Sensor [Compact / Connector built-in type] PM-65

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Specifications

Sensing characteristics

Cautions For Use

Specifications

Type		Compact / Connector built-in type
Type			Mounting-compatible with conventional model (Note 2)
Model No.	NPN output	PM-□65	PM-□65W
Model No.	PNP output	PM-□65-P	PM-□65W-P
Applicable regulations and certifications		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL/c-UL Listing certification
Sensing range		6 mm 0.236 in (fixed)
Minimum sensing object		0.8 × 1.2 mm 0.031 × 0.047 in opaque object
Hysteresis		0.05 mm 0.002 in or less
Repeatability		0.01 mm 0.0004 in or less
Supply voltage		5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption		15 mA or less
Output		<NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and + V) ・Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)
	Output operation	Incorporated with 2 outputs: Light-ON / Dark-ON
	Short-circuit protection	Incorporated
Response time		Under light received condition: 20 μs or less Under light interrupted condition: 80 μs or less (Maximum response frequency: 3 kHz) (Note 3)
Operation indicator		Orange LED (lights up under light received condition)
Pollution degree		3
Protection		IP40(IEC)
Ambient temperature		–25 to +55 ℃ –13 to +131 ℉ (No dew condensation or icing allowed), Storage: –30 to +80 ℃ –22 to +176 ℉
Ambient humidity		5 to 85 % RH, Storage: 5 to 95 % RH
Ambient illuminance		Fluorescent light: 1,000 ℓx at the light-receiving face
Voltage withstandability		1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance		20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance		10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s²) in X, Y and Z directions for two hours each
Shock resistance		15,000 m/s² acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element		Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Material		Enclosure: PBT, Display section: Polycarbonate
Cable length		Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable. (Note 4)
Weight		Net weight: 3 g approx., Gross weight: 3 g approx.

Notes:

1)	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2)	PM-T65W is mounting-compatible with our conventional model "PM-T64W". PM-F65W(-P) is mounting-compatible with our conventional model "PM-F54(P)". PM-R65W(-P) is mounting-compatible with our conventional model "PM-R54(P)".
3)	The response frequency is the value when the disc, given in the figure below, is rotated.

4) If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.

4)	If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.

Specifications

Sensing characteristics

Cautions For Use

If you have any questions, please select the option below to contact us or find answers.