Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Photoelectric Sensors / Laser Sensors > Photoelectric Sensor with an Inverter Light Resistant Circuit CX(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
Type | Thru-beam | Retroreflective | ||
---|---|---|---|---|
Long sensing range | With polarizing filters | |||
Model No. | NPN output | CX-M10 | CX-RVM5 | CX-PRVM3 |
PNP output (Note 2) |
CX-M10-PN | CX-RVM5-PN | CX-PRVM3-PN | |
Sensing range | 10 m 32.808 ft | 0.1 to 0.5 m 32.808 to 19.685 in (Note 3) |
0.1 to 3 m 32.808 to 11.811 in (Note 3) |
|
Sensing object | ø9 mm ø0.354 in or more opaque object |
ø50 mm ø1.969 in or more opaque or translucent object (Note 3, 5) |
ø50 mm ø1.969 in or more opaque, translucent or specular object (Note 3, 5) |
|
Hysteresis | - | |||
Repeatability (perpendicular to sensing axis) |
0.5 mm 0.020 in or less | |||
Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |||
Current consumption | Emitter: 10 mA or less Receiver: 30 mA or less (Note 6) |
40 mA or less (Note 7) | ||
Sensing output | <NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between sensing output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between sensing output and +V) ・Residual voltage: 1.5 V or less (at 100 mA source current) 0.4 V or less (at 16 mA source current) |
|||
Output operation | Switchable either Light-ON or Dark-ON | |||
Self-diagnosis output | <NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V) ・Residual voltage: 1 V or less (at 50 mA sink current) 0.4 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between self-diagnosis output and +V) ・Residual voltage: 1 V or less (at 50 mA source current) 0.4 V or less (at 16 mA source current) |
|||
Output operation | ON under unstable sensing condition. |
Type | Diffuse reflective | Narrow-view | ||
---|---|---|---|---|
Long sensing range | Short sensing range | |||
Model No. | NPN output | CX-D800 | CX-D100 | CX-ND300R |
PNP output (Note 2) |
CX-D800-PN | CX-D100-PN | CX-ND300R-PN | |
Sensing range | 800 mm 31.496 in (Note 4) |
100 mm 3.937 in (Note 4) |
70 to 300 mm 2.756 to 11.811 in (Note 4) |
|
Sensing object | Opaque, translucent or transparent object (Note 5) |
Opaque, translucent or transparent object (Note 5) (Min. sensing object: ø0.5 mm ø0.020 in copper wire) |
||
Hysteresis | 15 % or less of operation distance | |||
Repeatability (perpendicular to sensing axis) |
0.5 mm 0.020 in or less | |||
Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |||
Current consumption | 40 mA or less (Note 7) | |||
Sensing output | <NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between sensing output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between sensing output and +V) ・Residual voltage: 1.5 V or less (at 100 mA source current) 0.4 V or less (at 16 mA source current) |
|||
Output operation | Switchable either Light-ON or Dark-ON | |||
Self-diagnosis output | <NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V) ・Residual voltage: 1 V or less (at 50 mA sink current) 0.4 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between self-diagnosis output and +V) ・Residual voltage: 1 V or less (at 50 mA source current) 0.4 V or less (at 16 mA source current) |
|||
Output operation | ON under unstable sensing condition. |
Note 1 : | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |
---|---|
Note 2 : | Please note that the inverter light resistant circuit is not installed on the PNP output type. |
Note 3 : | The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-230 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away. |
Note 4 : | The sensing range of the diffuse reflective type sensor is specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
Note 5 : | Make sure to confirm detection with an actual sensor befor use. |
Note 6 : | For PNP output type, the current consumption is 40 mA or less. |
Note 7 : | For PNP output type, the current consumption is 50 mA or less. |
|
Type | Thru-beam | Retroreflective | ||
---|---|---|---|---|
Long sensing range | With polarizing filters | |||
Model No. | NPN output | CX-M10 | CX-RVM5 | CX-PRVM3 |
PNP output | CX-M10-PN | CX-RVM5-PN | CX-PRVM3-PN | |
Test input (emission halt) function | Incorporated | - | ||
Response time | 1 ms or less | |||
Sensitivity adjuster | 2-turn adjuster with indicator | |||
Automatic interference prevention function |
- | Incorporated (Two units of sensors can be mounted close together.) | ||
Protection | IP67 (IEC) | |||
Ambient temperature | -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed ) (Note 8) , Storage: -30 to +70 ℃ -22 to +158 ℉ |
|||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||
Emitting element | Infrared (modulated) | Red LED (modulated) | ||
Material | Enclosure: Heat-resistant ABS, Lens: Acylic, Indicator cover: Polyalylate | |||
Net weight | Emitter: 50 g approx. Receiver: 50 g approx. |
50 g approx. | ||
Accessories | MS-CX-1 (Sensor mounting bracket): 2 set Adjusting screwdriver: 1 pc. |
MS-CX-1 (Sensor mounting bracket): 1 set RF-230 (Reflector) : 1 pc., Adjusting screwdriver: 1 pc. |
||
Dimensions | W12 x H31 x D25 mm W0.472 x H1.220 x D0.984 in |
Type | Diffuse reflective | Narrow-view | ||
---|---|---|---|---|
Long sensing range | Short sensing range | |||
Model No. | NPN output | CX-D800 | CX-D100 | CX-ND300R |
PNP output | CX-D800-PN | CX-D100-PN | CX-ND300R-PN | |
Test input (emission halt) function | - | |||
Response time | 1 ms or less | |||
Sensitivity adjuster | 2-turn adjuster with indicator | |||
Automatic interference prevention function |
Incorporated (Two units of sensors can be mounted close together.) | |||
Protection | IP67 (IEC) | |||
Ambient temperature | -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed ) (Note 8) , Storage: -30 to +70 ℃ -22 to +158 ℉ |
|||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||
Emitting element | Infrared LED (modulated) | Red LED (modulated) | ||
Material | Enclosure: Heat-resistant ABS, Lens: Acylic, Indicator cover: Polyalylate | |||
Net weight | 50 g approx. | |||
Accessories | MS-CX-1 (Sensor mounting bracket): 2 set Adjusting screwdriver: 1 pc. |
|||
Dimensions | W12 x H31 x D25 mm W0.472 x H1.220 x D0.984 in |
Note 8 : | In case the sensor is to be used at an ambient tempreature of +15 ℃ +23 ℉, or less, please contact our office. |
---|
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)