Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Photoelectric Sensors / Laser Sensors > Miniature-size Photoelectric Sensor EX(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
■Notice of change for conforming to the revised CE Mark related directive
>> Click here
Type | Thru-beam | Diffuse reflective | ||
---|---|---|---|---|
Side sensing | Top sensing | Side sensing | ||
Model No. | EX-M2E | EX-M2 | EX-D200E | |
Sensing range | 2 m 6.562 ft | 200 mm 7.874 in (Note 2) | ||
Sensing object | ø7 mm ø0.276 in or more opaque object (Note 3) | Opaque, translucent or transparent object (Note 4) | ||
Hysteresis | - | 15 % or less of operation distance | ||
Repeatability (perpendicular to sensing axis) |
0.1 mm 0.004 in or less | 0.04 mm 0.002 in or less | - | |
Supply voltage | 12 to 24V DC ± 10 % Ripple P-P 10 % or less | |||
Current consumption | Emitter: 20 mA or less, Receiver: 20 mA or less | 30 mA or less | ||
Output | NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) |
|||
Utilization category | DC-12 or DC-13 | |||
Output operation | Selectable either Light-ON or Dark-ON by the control input | |||
Response time | 1 ms or less | |||
Sensitivity adjuster | - | Continuously variable adjuster | ||
Pollution degree | 3 (Industrial environment) | |||
Protection | IP 65 (IEC) | |||
Ambient temperature | -10 to +60 ℃ -14 to +76 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
|||
Emitting element | Infrared LED (modulated) | |||
Material | Enclosure: PBT (glass fiber reinforced) Lens: Polycarbonate |
|||
Net weight | Emitter: 60 g approx. Receiver: 60 g approx. |
Emitter: 60 g approx. Receiver: 65 g approx. |
65 g approx. | |
Accessories | MS-EX-1E (Sensor mounting bracket): 2 sets |
MS-EX-1 (Sensor mounting bracket): 2 sets |
MS-EX-1E (Sensor mounting bracket): 1 set Adjusting screwdriver: 1 No. Adjuster cap: 1 No. |
|
Dimensions | W10 x H26 x D12 mm W0.394 x H1.024 x D0.472 in |
W10 x H15 x D25 mm W0.394 x H0.591 x D0.984 in |
W10.4 x H25 x D15 mm W0.409 x H0.984 x D0.591 in |
Note 1: | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |
---|---|
Note 2: | The sensing range of the diffuse reflective type sensor is specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
Note 3: | If slit masks (optional) are fitted, an object of 0.5 x 3 mm 0.020 x 0.118 in in case of EX-M2E and 0.5 x 2 mm 0.020 x 0.079 in in case of EX-M2 can be detected. |
Note 4: | Make sure to confirm detection with an actual sensor before use. |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)