[System Maintenance Notice]
Due to ongoing system maintenance, the site search and specification search functions are temporarily unavailable. We apologize for any inconvenience this may cause and appreciate your understanding.
【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Small Light Curtain Type 4 SF4-AH (Discontinued Products)
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
September 30, 2013 |
|
|
Dimensions
SF4-AH□(-N)
Sensor
Assembly dimensions
Mounting drawing for the sensor on which the sensor mounting brackets and the intermediate supporting brackets are mounted.
[Back mounting] |
|
|
[Side mounting] |
|
|
SF4-AH□-H
Sensor
Assembly dimensions
Mounting drawing for the sensor on which the sensor mounting brackets and the intermediate supporting brackets are mounted.
[Back mounting] |
|
|
[Side mounting] |
|
|
SF4-AH□(-N) SF4-AH□-H
Sensor
In case of using cable for series connection
Mounting drawing for SF4-AH□(-N) on which the cables for series connection, the mounting brackets and the intermediate supporting brackets are mounted. When utilizing SF4-AH□-H, although the shape is different, all dimensions listed in the table below are exactly the same as those of SF4-AH□(-N).
[Back mounting] |
|
|
[Side mounting] |
|
|
SF4-AH□(-N)
Sensor
In case of mounting front protection unit
Mounting drawing for the sensor on which the U-shaped intermediate supporting brackets and the front protection unit are mounted.
[Back mounting] |
|
|
[Side mounting] |
|
|
SF4-AH□(-N)
Sensor
In case of mounting front protection unit and using cable for series connection
Mounting drawing for the sensor on which the U-shaped intermadiate supporting brackets, the front protection unit and the cables for series connection are mounted.
[Back mounting] |
|
|
[Side mounting] |
|
|
SF-HC
Handy-controller (Optional)
MS-SF2N-1
Rear mounting bracket (Accessory for sensor)
|
Material:
Cold rolled carbon steel (SPCC) (Black chromate)
Four bracket set
[Eight M3 (length 5 mm 0.197 in) hexagon-socket- head bolts are attached.] |
|
SF-IND-2
Large display unit for light curtain (Optional)
|
Material:
Bracket ... Cold rolled carbon steel (SPCC) (Black chromate)
Base ... POM
Cover ... Polycarbonate |
|
MS-SF2N-2
U-shaped rear mounting intermediate supporting bracket for SF4-AH□(-N) (Accessory for SF4-AH□(-N) having 36 beam channels or more)
U-shaped rear supporting bracket |
|
|
Retaining plate |
|
Material:
Cold rolled carbon steel (SPCC) (Black chromate)
Set of 2 Nos. each of U-shaped rear supporting bracket and retaining plate (Note)
Note:
MS-SF2N-2 (U-shaped rear mounting intermediate supporting bracket) is attached with the following sensors. The number of attached U-shaped rear mounting intermediate supporting brackets is different depending on the sensor as follows.
SF4-AH36(-N), SF4-AH40(-N): 1 set
SF4-AH48(-N): 2 sets
SF4-AH56(-N), SF4-AH64(-N), SF4-AH72(-N): 3 sets
SF4-AH80(-N): 4 sets
SF4-AH88(-N), SF4-AH96(-N): 5 sets |
|
MS-SF4A-H2
U-shaped rear mounting intermediate supporting bracket for SF4-AH□-H (Accessory for SF4-AH□-H having 36 beam channels or more)
U-shaped rear supporting bracket |
|
|
Retaining plate |
|
Material:
Cold rolled carbon steel (SPCC) (Black chromate)
Set of 2 Nos. each of U-shaped rear supporting bracket and retaining plate (Note)
Note:
MS-SF4A-H2 (U-shaped rear mounting intermediate supporting bracket) is attached with the following sensors. The number of attached U-shaped rear mounting intermediate supporting brackets is different depending on the sensor as follows.
SF4-AH36-H, SF4-AH40-H: 1 set
SF4-AH48-H: 2 sets
SF4-AH56-H, SF4-AH64-H, SF4-AH72: 3 sets
SF4-AH80-H: 4 sets
SF4-AH88-H, SF4-AH96-H: 5 sets |
|
MS-SF2N-L
L-shaped intermediate supporting bracket [Accessory for SF4-AH□(-H) having 36 beam channels or more]
|
Material:
Cold rolled carbon steel (SPCC) (Black chromate)
Two L-shaped bracket set
[Two M3 (length 10 mm 0.394 in) pan head screws, two M4 (length 10 mm 0.394 in) hexagon-socket-head bolts, and two nuts are attached.]
Note:
MS-SF2N-L (L-shaped intermediate supporting bracket) is attached with the following sensors. The number of attached L-shaped intermediate supporting brackets is different depending on the sensor as follows.
SF4-AH36(-N/H), SF4-AH40(-N/H): 1 set
SF4-AH48(-N/H): 2 sets
SF4-AH56(-N/H), SF4-AH64(-N/H), SF4-AH72(-N/H): 3 sets
SF4-AH80(-N/H): 4 sets
SF4-AH88(-N/H), SF4-AH96(-N/H): 5 sets |
|
MS-SF2N-5
Center sensor mounting bracket (Optional)
|
Material:
Cold rolled carbon steel (SPCC) (Black chromate)
Four bracket set |
|
MS-SF2N-3
Side mounting bracket (Optional)
Right side-mounting of sensors |
|
Material:
Cold rolled carbon steel (SPCC) (Black chromate)
Four bracket set |
|
Left side-mounting of sensors |
|
|
MS-SF2N-4
U-shaped side mounting intermediate supporting bracket for SF4-AH□(-N) (Optional)
U-shaped side supporting bracket |
|
|
Retaining plate |
|
Material:
Cold rolled carbon steel (SPCC) (Black chromate)
Set of 2 Nos. each of U-shaped side supporting bracket and retaining plate (Note)
Note:
MS-SF2N-4 (U-shaped side mounting intermediate supporting bracket) is attached with the following sensors. The number of attached U-shaped side mounting intermediate supporting bracket is different depending on the sensor as follows.
SF4-AH36(-N), SF4-AH40(-N): 1 set
SF4-AH48(-N): 2 sets
SF4-AH56(-N), SF4-AH64(-N), SF4-AH72(-N): 3 sets
SF4-AH80(-N): 4 sets
SF4-AH88(-N), SF4-AH96(-N): 5 sets |
|
MS-SF4A-H4
U-shaped side mounting intermediate supporting bracket for SF4-AH□-H (Optional)
U-shaped side supporting bracket |
|
|
Retaining plate |
|
Material:
Cold rolled carbon steel (SPCC) (Black chromate)
Set of 2 Nos. each of U-shaped side supporting bracket and retaining plate (Note)
Note:
MS-SF4A-H4 (U-shaped side mounting intermediate supporting bracket) is attached with the following sensors. The number of attached U-shaped side mounting intermediate supporting bracket is different depending on the sensor as follows.
SF4-AH36-H, SF4-AH40-H: 1 set
SF4-AH48-H: 2 sets
SF4-AH56-H, SF4-AH64-H, SF4-AH72-H: 3 sets
SF4-AH80-H: 4 sets
SF4-AH88-H, SF4-AH96-H: 5 sets |
|
MC-SF4AH-□
Front protection unit (Optional)
Protection bar mounting bracket
Right side-mounting of sensors |
|
Material:
Cold rolled carbon steel (SPCC) (Black chromate) |
|
Left side-mounting of sensors |
|
|
Protection bar intermediate supporting bracket |
|
Material:
Cold rolled carbon steel (SPCC) (Black chromate)
Note:
1 No. protection bar intermediate supporting bracket is attached with the front protection bracket for 40 beam channels or more. |
|
L-shaped rear mounting intermediate supporting bracket for front protection unit MS-SF4A-L2 |
|
Note:
1) The number of MS-SF4A-L2 (L-shaped rear mounting intermediate supporting bracket for front protection unit) is different depending on the product as follows.
MC-SF4AH-36, MC-SF4AH-40: 1 No.
MC-SF4AH-48: 2 Nos.
MC-SF4AH-56, MC-SF4AH-64, MC-SF4AH-72: 3 Nos.
MC-SF4AH-80: 4 Nos.
MC-SF4AH-88, MC-SF4AH-96: 5 Nos. |
|
L-shaped side mounting intermediate supporting bracket for front protection unit MS-SF4A-L4 |
|
Note:
1) The number of MS-SF4A-L4 (L-shaped side mounting intermediate supporting bracket for front protection unit) is different depending on the product as follows.
MC-SF4AH-36, MC-SF4AH-40: 1 No.
MC-SF4AH-48: 2 Nos.
MC-SF4AH-56, MC-SF4AH-64, MC-SF4AH-72: 3 Nos.
MC-SF4AH-80: 4 Nos.
MC-SF4AH-88, MC-SF4AH-96: 5 Nos.
Two M5 (length 20 mm 0.787 in) hexagon-socket-head bolts, four M3 (length 6 mm 0.236 in) hexagon-socket-head bolts, M8 (length 16 mm 0.63 in) hexagon-headed bolt (Note 2) and two spacers are attached.
Note:
2) The number of M8 (length 16 mm 0.63 in) hexagon-socket-head bolt is different depending on the product as follows.
MC-SF4AH-8/12/16/20/24/28/32: 2 Nos.
MC-SF4AH-36: 3 Nos.
MC-SF4AH-40: 4 Nos.
MC-SF4AH-48: 5 Nos.
MC-SF4AH-56/64/72: 6 Nos.
MC-SF4AH-80: 7 Nos.
MC-SF4AH-88/96: 8 Nos. |
|
Return to top
Return to top