AUTOMATION
CONTROLS

Search
Discontinued
Products



Key selector switch SG-D1 (Discontinued Products)

Specifications

Model No. Position Contact
configuration
Contact block Operation position Key removal
Mounting position
Mounting position
(Note)
Contact 1 2
SG-D1-2A11 1NO/1NC
(11)
[1] NO  
[2] NC  
SG-D1-2A22 2NO/2NC
(22)
[1] NO  
[2] NC  
[3] NO  
[4] NC  
SG-D1-2B11 1NO/1NC
(11)
[1] NO  
[2] NC  
SG-D1-2B22 2NO/2NC
(22)
[1] NO  
[2] NC  
[3] NO  
[4] NC  
SG-D1-2C11 1NO/1NC
(11)
[1] NO  
[2] NC  
SG-D1-2C22 2NO/2NC
(22)
[1] NO  
[2] NC  
[3] NO  
[4] NC  

Note: Contact blocks are attached as shown below:

Designation Key selector switch
Series SG-D1 series
Applicable
standards
JIS C 8201-5-1, IEC 60947-5-1, EN 60947-5-1, UL 508 (UL listed Certification), CSA 22.2 No.14 (c-UL listed Certification)
Operating condition Ambient
temperature
-25 to +60℃ -13 to + 140 ℉ (No dew condensation or icing allowed)
Storage: -40 to +80 ℃ -40 to +176 ℉
Ambient humidity 45 to 85 % RH
Pollution degree 3
Altitude 2,000 m 6,561.68 ft max.
Impulse withstand
voltage (Uimp)
4 kV
Rated insulation
voltage (Ui)
600 V
Thermal current (Ith) 10 A
Rated
operational
voltage (Ue) /
Rated
operational
current (Ie)
  Ue
24V 48V 50V 110V 220V 440V
Ie AC Resistive
load (AC-12)
10A - 10A 10A 6A 2A
Inductive
load (AC-15)
(A600))
10A - 7A 5A 3A 1A
DC Resistive
load (DC-12)
8A 4A - 2.2A 1.1A -
Inductive
load (DC-13)
(P600)
4A 2A - 1.1A 0.6A -
Contact
resistance
50 mΩ max. (initial value)
Insulation
resistance
100 MΩ min. (500 V DC megger)
Electric shock
protection class
Class II(IEC 61140)
Overvoltage
category
II(IEC 60664-1)
Protection Front of the panel: IP65
Shock resistance Malfunction: 100 m/s2, Destruction: 1,000m/s2
Vibration
resistance
Malfunction: 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction: 30 Hz, half amplitude 1.5 mm 0.059 in
B10d 100,000
(ISO 13849-1 Annex C Table C.1)
Mechanical
durability
100,000 operations min.
Electrical
durability
100,000 operations min. (1,200 operations/hour)
Material Actuator: PA6, Contact block: PA66
Connecting
method
Terminal screw (M3.5 philips & flathead )
Applicable wire
size
Max.2mm2(Single core ø1.6 ø0.063 max.)
2 wires max.
Tightening torque of
the terminal screws
1.0 to 1.3 N・m
Tightening torque of
the locking ring
2.0 N・m
Selector behavior 2 positions
Minimum direct opening
operating angle
90°
Minimum direct
opening torque
0.4 N・m
Maximum
operation angle
90°
Weight SG-D1-2□11: Approx. 75 g, SG-D1-2□22:Approx. 95 g
Accessories Key: 2pcs., Lever lock: 1 pc.

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region




Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)