Degree of protection against water, human body and solid foreign material.
Protection degree is specified as per IEC (International Electrotechnical Commission).
|1||Protection against contact with internal live parts by a human hand (ø50 mm ø1.969 in)|
|2||Protection against contact with internal live parts by a human finger (ø12 mm ø0.472 in)|
|3||Protection against contact with internal live parts by a solid object more than 2.5 mm 0.098 in in thickness or diameter|
|4||Protection against contact with internal live parts by a solid object more than 1.0 mm 0.039 in in thickness or diameter|
|5||Protection against dust penetration which can affect operation|
|6||Complete protection against dust penetration|
|1||No harmful effect due to vertically falling water drops|
|2||No harmful effect due to water drops falling from a range 15° wider than the vertical|
|3||No harmful effect due to water drops falling from a range 60° wider than the vertical|
|4||No harmful effect due to water splashes from any direction|
|5||No harmful effect due to direct water jet from any direction|
|6||No water penetration due to direct water jet from any direction|
|7||No water penetration due to immersion in water under specified conditions|
|8||No water penetration during immersion, even under conditions that are more harsh than the ones in No.7|
|Note :||The IEC standard prescribes test procedures for each protection degree given above. The protection degree specified in the product specifications has been decided according to these tests.|
This specifies protection against oil in addition to IP67 / IP68 protection of IEC standards. It specifies that oil drops or bubbles should not enter from any direction.
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)