Business
> Industrial Devices
> Automation Controls Top
> Components & Devices
> Switches
> Seal Type Switches
> ABJ (BJ) Turquoise Switches
> Rating/Performance
ABJ (BJ) Turquoise Switches
-
Lineup
-
ABJ (BJ) Turquoise Switches
Ultra-miniature Size Sealed Switches
-
ABS (BS) Turquoise Switches
Subminiature Size Sealed Switches
-
ABV (BV) Turquoise Switches
Miniature Size Sealed Switches
-
Turquoise Stroke Switches
Long Stroke and Sliding Contact Construction Sealed Switches
-
Turquoise Stroke Mini Switches
Small size and Long Stroke Sliding Contact Construction Sealed Switches
-
Turquoise Stroke Mini Switch Resistor installed type
Small seal switches with wiring failure detecting function
-
- CAD data Catalogs/Datasheets
- FAQ
|
Contact rating
| Item | Specifications | ||||||
|---|---|---|---|---|---|---|---|
| Contact specifications | AgNi alloy contact type | AgNi alloy + Au-clad contact type | |||||
| Operating force (OF) Max. | 1.23 N | 1.96 V | 2.45 N | 1.23 N | 1.96 N | 2.45 N | |
| Load | 125 V AC | 1 A | 2 A | 1 A | 0.1 A | 0.1 A | 0.1 A |
| 30 V DC | 1 A | 2 A | 1 A | 0.1 A | 0.1 A | 0.1 A | |
| * | Operating force is value of pin plunger. |
|---|
Low-level circuit rating (Au-clad contact type)
| Rated voltage | Resistive load |
|---|---|
| 6 V DC | 5 mA |
| 12 V DC | 2 mA |
| 24 V DC | 1 mA |
Specifications
| Item | Specifications | ||
|---|---|---|---|
| Expected life | Mechanical life (OT: Specified value) | Leaf lever type: Min. 5 x 105 (at 60 cpm) Wire leads side type: Min. 3 x 105 (at 60 cpm) |
|
| Electrical life (OT: Max.) | AgNi alloy contact type | Min. 3 x 104 (at 20 cpm) (at rated load) | |
| AgNi alloy + Au-clad contact type | Min. 105 (at 20 cpm) (at rated load) | ||
| Insulation resistance | Min. 100 MΩ (at 500 V DC insulation resistance meter) | ||
| Dielectric strength |
Between non-continuous terminals | 600 Vrms | |
| Between each terminal and other exposed metal parts | 1,500 Vrms | ||
| Between each terminal and ground | 1,500 Vrms | ||
| Vibration resistance (Pin plunger type) | 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening Max. 1 msec.) | ||
| Shock resistance (Pin plunger type) | Min. 294 m/s2(Contact opening Max. 1 msec.) | ||
| Contact resistance (Initial) |
AgNi alloy contact type | Terminal type: Max. 50 mΩ Wire lead type: Max. 100 mΩ (By voltage drop 1 A 6 to 8 V DC) |
|
| AgNi alloy + Au-clad contact type | Terminal type: Max. 100 mΩ Wire lead type: Max. 150 mΩ (By voltage drop 0.1 A 6 to 8 V DC) |
||
| Allowable operating speed (at no load) | 1 to 500 mm/sec. | ||
| Max. operating cycle rate (at no load) | 120 cpm (Long stroke type: 60 cpm) | ||
| Ambient temperature | -40 to +85°C | ||
| Unit weight | Approx. 0.5 g (Terminal type) | ||
| Protection grade | IP67 (except exposed terminal part of terminal type) | ||
| * | Test conditions and judgment are complying with “NECA C 4505”. |
|---|
Operating characteristics
| Type of actuator | 8th digit of Part No. | Operating Force (OF) Max. |
Release Force (RF) Min |
Pretravel (PT) Max. | Movement Differential (MD)Max. |
Overtravel (OT) Min. | Operating Position (OP) | |
|---|---|---|---|---|---|---|---|---|
| Pin plunger | 4 | 1.23N | 0.15N | 0.6mm | 0.12mm | 0.25mm |
Mounting hole: 1.2 type 5.5±0.2mm Mounting hole: 2.3 type 7.0±0.2mm |
|
| 6 | 1.96N | 0.25N | ||||||
| Hinge lever | 4 | 0.39N | 0.029N | 3.0mm | 0.5mm | 0.5mm |
Mounting hole: 1.2 type 6.8±1.0mm Mounting hole: 2.3 type 8.3±1.0mm |
|
| 6 | 0.64N | 0.049N | ||||||
| Simulated roller lever | 4 | 0.39N | 0.029N | 3.0mm | 0.5mm | 0.5mm |
Mounting hole: 1.2 type 9.8±1.0mm Mounting hole: 2.3 type 11.3±1.0mm |
|
| 6 | 0.64N | 0.049N | ||||||
| Roller lever | 4 | 0.39N | 0.029N | 3.0mm | 0.5mm | 0.5mm |
Mounting hole: 1.2 type 13.1 ±1.0mm Mounting hole: 2.3 type 14.6±1.0mm |
|
| 6 | 0.64N | 0.049N | ||||||
| Leaf lever | Wire leads bottom type |
4 | 0.98N | 0.20N | 6.0mm | 1.0mm | 2.5mm | Mounting hole: 3.0 type 16.0±2.0mm |
| 6 | 1.27N | 0.29N | 6.0mm | 1.0mm | 2.5mm | Mounting hole: 3.0 type 16.0±2.0mm | ||
| Wire leads side type |
4 | 1.27N | 0.22N | 2.6mm | 0.5mm | 1.4mm |
Fixed pin type 10.7±0.7mm Mounting hole: 3.0 type 16.25±0.7mm |
|
| 6 | 1.76N | 0.26N | 2.6mm | 0.5mm | 1.4mm |
Fixed pin type 10.7±0.7mm Mounting hole: 3.0 type 16.25±0.7mm |
||
| Long stroke type | 7 | 2.45N | 0.20N | — | 0.5mm | 2.0mm | 2.5±0.4mm | |
| * | The O.P. differs between the 1.2 mm and 2.3 mm dia. installation hole types. |
|---|
DATA
|
| * | OF: Value of pin plunger The diagram above is intended as a reference. Please use the product within the rated voltage and current. |
|---|
|
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT US
BY EMAIL
BY EMAIL
Please click your area to select country or region
Related Information
FA Sensors & Components
Service & Support
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
