Business > Industrial Devices > Automation Controls Top > Components & Devices > Switches > Seal Type Switches > ABS (BS) Turquoise Switches > Rating/Performance
|
Item | Specifications | |||
---|---|---|---|---|
Contact specifications |
AgNi alloy contact type Plunger color: Black |
Au-clad contact type | ||
Triple layer contact type Plunger color: Red |
Double layer contact type Plunger color: Green |
|||
Load style | Resistive load | Inductive load (cosφ ≒ 0.7) |
Resistive load | |
125 V AC | 2A | 2A | 0.1A | — |
250 V AC | 2A | 2A | 0.1A | — |
30 V DC | 2A | 2A | 0.1A | 0.1A |
125 V DC | 0.4A | 0.05A | — | — |
* | Note: Inductive load with direct current is 7 ms time constant or less. |
---|
Rated voltage | Resistive load |
---|---|
6 V DC | 5mA |
12 V DC | 2mA |
24 V DC | 1mA |
|
* | Note: If the contact is being used in the constant low-level circuit load range, the Au-clad double layer contact is recommended. If there is a danger of the current being less than 0.5 A, for instance if the contact is being turned on and off, the Au-clad triple layer contact type is recommended. The diagram above is intended as a reference. Please use the product within the rated voltage and current. |
---|
Item | Specifications | ||
---|---|---|---|
Expected life | Mechanical life (OT: Specified value) | Leaf lever: Min. 5x105 (at 60 cpm), Other types: Min. 5x106 (at 60 cpm) |
|
Electrical life (OT: Max.) |
AgNi alloy contact type | Min. 5x104 (at 20 cpm) (at rated load) | |
Au-clad contact type | Min. 2x105 (at 20 cpm) (at rated load) | ||
Insulation resistance | Min. 100 MΩ (at 500 V DC insulation resistance meter) | ||
Dielectric strength |
Between non-continuous terminals | 1,000 Vrms for 1 min | |
Between each terminal and other exposed metal parts | 1,500 Vrms for 1 min | ||
Between each terminal and ground | 1,500 Vrms for 1 min | ||
Vibration resistance (Pin plunger type) | 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening Max. 1 msec.) |
||
Shock resistance (Pin plunger type) | Min. 294 m/s2 (Contact opening Max. 1 msec.) | ||
Contact resistance (Initial) |
AgNi alloy contact type | Terminal type: Max. 50 mΩ Wire leads: Max. 100 mΩ (by voltage drop 1 A 6 to 8 V DC) |
|
Au-clad contact type | Terminal type: Max. 100 mΩ Wire leads: Max. 150 mΩ (by voltage drop 0.1 A 6 to 8 V DC) |
||
Allowable operating speed (at no load) | 0.1 to 500 mm/sec. | ||
Max. operating cycle rate (at no load) | 120 cpm | ||
Ambient temperature | -40°C to +85°C | ||
Unit weight | Approx. 2 g (Terminal type) | ||
Protection grade | IP67 (except exposed terminal part of terminal type) |
* | Note: Test conditions and judgement are complying with “NECA C 4505”. |
---|
Type of actuator | 8th digit of Part No. |
Operating Force (OF) Max. |
Release Force (RF) Min. |
Pretravel (PT) Max. |
Movement Differential (MD) Max. |
Overtravel (OT) Min. |
Operating Position (OP) |
---|---|---|---|---|---|---|---|
Pin plunger | 4 | 0.98N | 0.15N | 0.6mm | 0.1mm | 0.4mm | 8.4±0.3mm |
5 | 1.47N | 0.20N | |||||
Short hinge lever | 4 | 0.39N | 0.034N | 2.5mm | 0.5mm | 0.8mm | 8.8±0.8mm |
5 | 0.59N | 0.039N | |||||
Hinge lever | 4 | 0.34N | 0.029N | 2.8mm | 0.8mm | 1.2mm | 8.8±0.8mm |
5 | 0.54N | 0.034N | |||||
Long hinge lever | 4 | 0.25N | 0.025N | 3.5mm | 1.0mm | 1.6mm | 8.8±1.2mm |
5 | 0.44N | 0.029N | |||||
Simulated roller lever | 4 | 0.34N | 0.029N | 2.8mm | 0.8mm | 1.2mm | 11.65±0.8mm |
5 | 0.54N | 0.034N | |||||
Roller lever | 4 | 0.39N | 0.034N | 2.5mm | 0.5mm | 0.8mm | 14.5±0.8mm |
5 | 0.59N | 0.039N | |||||
Leaf lever | 4 | 0.88N | 0.17N | 4.5mm | 1.0mm | 2.5mm | 14.5±1.5mm |
5 | 1.08N | 0.20N |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)