[System Maintenance Notice]
Due to ongoing system maintenance, the site search and specification search functions are temporarily unavailable. We apologize for any inconvenience this may cause and appreciate your understanding.
【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Timers / Counters / FA Componets > Temperature Controllers > KT2 Temperature Controllers > Cautions For Use
Discontinuation plan
|
Please install vertically in order to satisfy the IP66 specification for dust and splash proofing.
The possible control panel plate thickness for installation is between 1 to 10 mm 0.039 to 0.394 in.
(1) | Insert the unit from the front of the control panel. |
---|---|
(2) | Insert the mounting frame until that the two edges make contact with the panel. |
(3) | Tighten the screw and then turn it 3/4 of a turn after the edge of the screw reaches the panel. |
|
(1)PV/SV display (Red) | : | Indicates the process value (PV) and setting value (SV). |
---|---|---|
(2)MEMO/STEP display (Green) | : | Indicates the memory number during fixed value control. Indicates step number during program control. |
(3)PV indicator (Red) | : | Lights up when the input value is indicated. |
(4)SV indicator (Green) | : | Lights up when main setting value is indicated. |
(5)AT indicator (Yellow) | : | Flashes during auto-tuning (AT). |
(6)T/R indicator (Yellow) | : | Flashes during serial communication (Lit while sending data, Unlit while receiving data). |
(7)OUT indicator (Green) | : | Lights up when control output or OUT1 (heating side) output (optional: heating / cooling control) is ON. For DC current output type, it flashes corresponding to the manipulated variable in a 0.25 second cycle. |
(8)EV1 indicator (Red) | : | Lights up when alarm output 1 or OUT2 (cooling side) output (optional: heating / cooling control) is ON. |
(9)EV2 indicator (Red) | : | Lights up when alarm output 2 is ON. |
(10)Increase key | : | Increases the numeric value. |
(11)Decrease key | : | Decreases the numeric value. |
(12)Mode key | : | Selects the setting mode or registers the setting value. |
(13)OUT/OFF key | : | The control output OUT / OFF or program control RUN / STOP can be switched. |
This controller is intended to be used in the following environment (IEC 61010-1)
Mount the controller in a place with:
Wire-pressed terminal |
Company name | Type name | Fastening torque |
---|---|---|---|
Fork type | NICHIFU Co., Ltd. | 1.25Y-3 | 0.6 N•m Max. 1.0 N•m. |
J.S.T. Mfg. Co., Ltd. | VD1.25-B3A | ||
Round type | NICHIFU Co., Ltd. | 1.25-3 | |
J.S.T. Mfg. Co., Ltd. | V1.25-3 |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)