Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Sensors
> Fiber Sensors
> Communication Unit for Open Network SC-GU3
> Order guide
Partly Order Discontinued
|
Designation | Appearance | Model No. | Description |
---|---|---|---|
Communication unit for CC-Link IE Field |
![]() |
SC-GU3-04 | This is a communication unit, which can convert the output signal of a sensor amplifier into communication data for CC-Link IE Field. |
Communication unit for CC-Link |
![]() |
SC-GU3-01 | This is a communication unit, which can convert the output signal of a sensor amplifier into communication data for CC-Link. |
Communication unit for EtherCAT |
![]() |
SC-GU3-03 | This is a communication unit, which can convert the output signal of a sensor amplifier into communication data for EtherCAT. |
End unit | ![]() |
SC-GU3-EU | This end unit can change and check the settings of sensor amplifiers that allow optical communication and monitor operation status. |
Cascading connector unit | ![]() |
SC-71 | This one-touch connector is used to connect the following devices to SC-GU3-0□: The FX-500/410/311/300 fiber sensor, the LS-500/400 laser sensor, the DPS-400 digital pressure sensor, SC-E1, SC-A01 and SC-A02, etc |
e-CON 1-channel connector input extension unit |
![]() |
SC-E1 | This is a 1-channel connector input extension unit, compatible with an e-CON connector, can be connected to a NPN output type device.(Note 1) Includes power and input signal indicators (for one channel). When using in combination with the SC-GU3 series, use with the SC-71. |
e-CON 8-channel connector input extension unit |
![]() |
SC-E81 | This extension unit can be connected to eight NPN output type devices. Includes power and input signal indicators (for eight channels). |
e-CON 8-channel connector input extension unit (without an input signal indicator) |
![]() |
SC-E82 | This is an 8-channel connector input extension unit, compatible with an e-CON connector, can be connected to eight NPN output type devices.(Note 1) (Uses eight channels of signaling, regardless of the number of connected input devices.) Includes a power indicator. Does not include an input signal indicator. |
Analog voltage input unit | ![]() |
SC-A01 | This extension unit can be connected to NPN output type devices or analog voltage output type devices. When using in combination with the SC-GU3 series, use with the SC-71. |
Analog current input unit | ![]() |
SC-A02 | This extension unit can be connected to NPN output type devices or analog current output type devices. When using in combination with the SC-GU3 series, use with the SC-71. |
Note 1: | Conditions of connectable DC 2-wire type input device • Leak current: 1 mA or less (when the power is OFF), Offset voltage: 3 V or less (when the power is ON) • Product whose load current range includes 5 to 8 mA |
---|
If optical communication is to be used in a system that includes models not compatible with optical communication, connect the incompatible models after the SC-GU3-EU.
A maximum of 12 units can be connected to the FX-500 / LS-500 series, and a maximum of 16 units can be connected to the other sensor amplifiers.
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)