AUTOMATION
CONTROLS

Search
Discontinued
Products



Connector Built-in U-shaped Micro Photoelectric Sensor[Amplifier Built-in] PM-64 (Discontinued Products)

Specifications

Type Small and built-in connector type
K type T type L type Y type F type R type
Model No. NPN output PM-K64 PM-T64(W) PM-L64 PM-Y64 PM-F64 PM-R64
PNP output PM-K64P PM-T64P PM-L64P PM-Y64P PM-F64P PM-R64P
Sensing range 5 mm 0.197 in (fixed)
Minimum sensing object 0.8 x 1.8 mm 0.031 x 0.071 in opaque object
Hysteresis 0.05 mm 0.002 in or less (Note 2)
Repeatability 0.01 mm 0.0004 in or less (Note 3)
Supply voltage 5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption 15 mA or less
Output <NPN output type>
NPN open-collector transistor
• Maximum sink current: 50 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 0.7 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current)

<PNP output type>
PNP open-collector transistor
• Maximum source current: 50 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 0.7 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current)
  Utilization category DC-12 or DC-13
Output operation Incorporated with 2 outputs: Light-ON / Dark-ON
Response time Under light received condition: 20 μs or less
Under light interrupted condition: 100 μs or less
(Response frequency: 1 kHz or more) (Note 4)
Operation indicator Orange LED (lights up under light received condition)
Pollution degree 3 (Industrial environment)
Ambient temperature –25 to +55 ℃ –13 to +131 (No dew condensation or icing allowed), Storage: –30 to +80 ℃ –22 to +176
Ambient humidity 35 to 85 % RH, Storage: 5 to 95 % RH (Note 5)
Ambient illuminance Fluorescent light: 1,000 ℓx at the light-receiving face
EMC EN 60947-5-2
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 50 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 2,000 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each
Shock resistance 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions for three times each
Emitting element Infrared LED (Peak emission wavelength: 940 nm 0.037 mil, non-modulated)
Material Enclosure: PBT, Slit cover: Polycarbonate
Cable length Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 6)
Weight Net weight: 3 g approx.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 .
2) This is the value when a sensing object is moved in a lateral direction to the U-shape.
3) This is the value when a sensing object is moved in a lateral direction to the U-shape and when the inserting length of the sensing board is 5 mm 0.197 in.
4) The response frequency is the value when the disc, given in the figure below, is rotated.

5) 5-35% RH in an ambient temperature of +23 ℃ +73.4 .
6) Confirm that the sensor terminal voltage is more than 4.5 V when using an extension of over 20 m 65.617 ft.

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



BY PHONE

FAQ


Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)