[System Maintenance Notice]
Due to ongoing system maintenance, the site search and specification search functions are temporarily unavailable. We apologize for any inconvenience this may cause and appreciate your understanding.
【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Ultra-slim Safety door switch SG-A1
Dimensions
SG-A1□
Safety door switch
|
Note 1: Plug the unused actuator entry slot using the plug supplied with the switch. |
|
When using straight actuator (SG-K11) |
|
Note 2: The actuator stop is used to adjust the actuator position. Remove the actuator stop after the actuator position is mounted. |
|
When using the right-angle actuator (SG-K12) |
|
Note 2: The actuator stop is used to adjust the actuator position. Remove the actuator stop after the actuator position is mounted. |
|
When using the angle adjustable actuator (horizontal / vertical) (SG-K13 / SG-K14) |
|
Note 2: The actuator stop is used to adjust the actuator position. Remove the actuator stop after the actuator position is mounted. |
|
SG-K11
Actuator
Straight actuator
|
Note: The actuator stop is used to adjust the actuator position. Remove the actuator stop after the actuator position is mounted. |
|
SG-K12
Actuator
Right-angle actuator
* The tensile strength of the SG-K12 actuator is 100N. If an excessive tensile force is applied, the actuator may fall off the door.
When a tensile force exceeding 100N is expected, use the SG-K12A actuator with a plate. |
|
Note: The actuator stop is used to adjust the actuator position. Remove the actuator stop after the actuator position is mounted. |
|
SG-K13
Actuator
Horizontal / vertical angle adjustable actuators (SG-K13)
* The base is made of glass-reinforced PA66 (66 nylon). Angle adjustment screws are stainless steel (SUS).
When using adhesive on screws, take material compatibility into consideration. |
|
Note: The actuator stop is used to adjust the actuator position. Remove the actuator stop after the actuator position is mounted. |
|
SG-K14
Actuator
Horizontal / vertical angle adjustable actuators (SG-K14)
* The SG-K14 differs from the SG-K13 in that the direction in which the metal parts on the tip of the actuator are embedded is reversed by 180°. |
|
Note: The actuator stop is used to adjust the actuator position. Remove the actuator stop after the actuator position is mounted. |
|
Changes in the orientation of adjustment for angle adjustable (horizontal / vertical) actuators
The orientation of actuator adjustment (horizontal / vertical) can be changed using the orienting insert (white plastic) installed on the back of the actuator.
Do not lose the mounting plate. |
|
|
Manual unlocking key (Accessory: plastic)
Return to top
Return to top