Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Light Curtains / Safety Components > Ultra-slim Safety door switch SG-A1 > Dimensions

Ultra-slim Safety door switch SG-A1

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Dimensions

Dimensions

Unit: mm in

SG-A1□

Safety door switch

Note 1: Plug the unused actuator entry slot using the plug supplied with the switch.

When using straight actuator (SG-K11)

Note 2: The actuator stop is used to adjust the actuator position. Remove the actuator stop after the actuator position is mounted.

When using the right-angle actuator (SG-K12)

Note 2: The actuator stop is used to adjust the actuator position. Remove the actuator stop after the actuator position is mounted.

When using the angle adjustable actuator (horizontal / vertical) (SG-K13 / SG-K14)

Note 2: The actuator stop is used to adjust the actuator position. Remove the actuator stop after the actuator position is mounted.

SG-K11

Actuator
Straight actuator

Note: The actuator stop is used to adjust the actuator position. Remove the actuator stop after the actuator position is mounted.

SG-K12

Actuator
Right-angle actuator

* The tensile strength of the SG-K12 actuator is 100N. If an excessive tensile force is applied, the actuator may fall off the door.
When a tensile force exceeding 100N is expected, use the SG-K12A actuator with a plate.

Note: The actuator stop is used to adjust the actuator position. Remove the actuator stop after the actuator position is mounted.

SG-K13

Actuator
Horizontal / vertical angle adjustable actuators (SG-K13)

* The base is made of glass-reinforced PA66 (66 nylon). Angle adjustment screws are stainless steel (SUS).
When using adhesive on screws, take material compatibility into consideration.

Note: The actuator stop is used to adjust the actuator position. Remove the actuator stop after the actuator position is mounted.

SG-K14

Actuator
Horizontal / vertical angle adjustable actuators (SG-K14)

* The SG-K14 differs from the SG-K13 in that the direction in which the metal parts on the tip of the actuator are embedded is reversed by 180°.

Note: The actuator stop is used to adjust the actuator position. Remove the actuator stop after the actuator position is mounted.

Changes in the orientation of adjustment for angle adjustable (horizontal / vertical) actuators
The orientation of actuator adjustment (horizontal / vertical) can be changed using the orienting insert (white plastic) installed on the back of the actuator.
Do not lose the mounting plate.