AUTOMATION
CONTROLS

Search
Discontinued
Products



Aicure UJ30/35 LED Spot Type UV Curing Systems (Discontinued Products)

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

Last time buy September 30, 2021
 
Specifications

Specifications

Controllers

  UJ30 (Standard model) UJ35 (High performance model)
Controller Part No. ANUJ3000 ANUJ3500
Connectable heads 1to 4 heads
Connectable UV sensor Not compatible Compatible
UV irradiation One pattern irradiation in simple mode
The heads are either collectively or individually controlled.		 One pattern in simple mode and programmed pattern 0irradiation (up to 7 patterns with up to 10 steps) The heads are either collectively or individually controlled.
Pattern switching None (1 type) Switchable (8 types)
Intensity/irradiation control Digital intensity and irradiation control manual or timer control
Manual/timer control (0.1 to 99.9 sec., 100 to 999 sec.)
Auto-tuning function using the UV sensor (for UJ35 only)
Specifications of UV sensor: [Temperature characteristic: ±5 % F.S.
(+5 to +35℃ +41 to +95℉)/ Repeat accuracy: ±1 % (+25℃ +77℉)]
Setting/Operation Setting by the operation switches and power-on/off by a key switch Setting by the operation switches,
power-on/off by a key switch and
RS-232C (UJ35 setup tool)
Display 7-segment display
Cooling system Natural cooling (without a fan)
External control Method Parallel I/O RS-232C, Parallel I/O
External input Individual irradiation input, irradiation stop input, interlock, full-irradiation input,
pattern switching (for UJ35 only)
External output READY signal, error signal, alarm output, BUSY output (each head separately),
+5 V output (for indicator)
Operating voltage With AC adapter: 100 - 240 V AC (±10 %) 50 / 60 Hz 60 VA (at 100 V AC)
Operating ambient temperature /
Operating ambient humidity		 0 to +35℃ +32 to +95℉ / 30 to 85 % RH (No dew condensation allowed)
Storage ambient temperature /
Storage ambient humidity		 –10 to +60℃ +14 to +140℉ / 30 to 85 % RH (No dew condensation or icing allowed)
Accessories AC adapter and Key
Weight 1,180 g approx. (Controller: 940 g approx., AC adapter: 240 g approx.) 1,200 g approx. (Controller: 960 g approx., AC adapter: 240 g approx.)

Heads

ANUJ6180 series

365 nm wavelength
high-output head		 Head model No. ANUJ6186
Compatible lens Spot diameter ø3 mm
ø0.118 in		 ø4 mm
ø0.157 in		 ø6 mm
ø0.236 in		 ø8 mm
ø0.315 in		 ø10 mm
ø0.394 in		 Protective
glass (Note2)
Lens model No. ANUJ6423 ANUJ6424 ANUJ6426 ANUJ6428 ANUJ6420 ANUJ6430
UV intensity
(mW/cm2) (Note1)		 17,200 14,940 7,560 4,450 1,360 530
Irradiation distance 8 mm
0.315 in		 10 mm
0.394 in		 15 mm
0.591 in		 20 mm
0.787 in		 30 mm
1.181 in		 10 mm
0.394 in
365 nm wavelength
standard type		 Head model No. ANUJ6180
Compatible lens Spot diameter ø3 mm
ø0.118 in		 ø4 mm
ø0.157 in		 ø6 mm
ø0.236 in		 ø8 mm
ø0.315 in		 ø10 mm
ø0.394 in		 Protective
glass (Note2)
Lens model No. ANUJ6423 ANUJ6424 ANUJ6426 ANUJ6428 ANUJ6420 ANUJ6430
UV intensity
(mW/cm2) (Note1)		 12,500 10,600 4,720 2,500 580 300
Irradiation distance 10 mm
0.394 in		 12 mm
0.472 in		 20 mm
0.787 in		 25 mm
0.984 in		 30 mm
1.181 in		 10 mm
0.394 in
385 nm wavelength
high-output head		 Head model No. ANUJ6188
Compatible lens Spot diameter ø3 mm
ø0.118 in		 ø4 mm
ø0.157 in		 ø6 mm
ø0.236 in		 ø8 mm
ø0.315 in		 ø10 mm
ø0.394 in		 Protective
glass (Note2)
Lens model No. ANUJ6423 ANUJ6424 ANUJ6426 ANUJ6428 ANUJ6420 ANUJ6430
UV intensity
(mW/cm2) (Note1)		 19,500 16,920 8,680 4,750 1,400 580
Irradiation distance 8 mm
0.315 in		 10 mm
0.394 in		 15 mm
0.591 in		 20 mm
0.787 in		 30 mm
1.181 in		 10 mm
0.394 in
385 nm wavelength
standard type		 Head model No. ANUJ6184
Compatible lens Spot diameter ø3 mm
ø0.118 in		 ø4 mm
ø0.157 in		 ø6 mm
ø0.236 in		 ø8 mm
ø0.315 in		 ø10 mm
ø0.394 in		 Protective
glass (Note2)
Lens model No. ANUJ6423 ANUJ6424 ANUJ6426 ANUJ6428 ANUJ6420 ANUJ6430
UV intensity
(mW/cm2) (Note1)		 14,700 11,700 5,800 2,790 590 330
Irradiation distance 10 mm
0.394 in		 12 mm
0.472 in		 15 mm
0.591 in		 20 mm
0.787 in		 30 mm
1.181 in		 10 mm
0.394 in
405 nm
wavelength
high-output
head		 Head model No. ANUJ6189
Compatible lens Spot diameter ø3 mm
ø0.118 in		 ø4 mm
ø0.157 in		 ø6 mm
ø0.236 in		 ø8 mm
ø0.315 in		 ø10 mm
ø0.394 in		 Protective
glass (Note2)
Lens model No. ANUJ6423 ANUJ6424 ANUJ6426 ANUJ6428 ANUJ6420 ANUJ6430
UV intensity
(mW/cm2) (Note1)		 20,900 17,800 9,190 5,450 1,790 810
Irradiation distance 8 mm
0.315 in		 10 mm
0.394 in		 15 mm
0.591 in		 20 mm
0.787 in		 30 mm
1.181 in		 10 mm
0.394 in
405 nm wavelength
standard type		 Head model No. ANUJ6187
Compatible lens Spot diameter ø3 mm
ø0.118 in		 ø4 mm
ø0.157 in		 ø6 mm
ø0.236 in		 ø8 mm
ø0.315 in		 ø10 mm
ø0.394 in		 Protective
glass (Note2)
Lens model No. ANUJ6423 ANUJ6424 ANUJ6426 ANUJ6428 ANUJ6420 ANUJ6430
UV intensity
(mW/cm2) (Note1)		 15,500 12,600 5,730 3,150 890 440
Irradiation distance 10 mm
0.394 in		 12 mm
0.472 in		 20 mm
0.787 in		 25 mm
0.984 in		 30 mm
1.181 in		 10 mm
0.394 in
Common item Light source Class 3B LED product (JIS C6802:2005) Risk group 3 (ANUJ6189 / ANUJ6187: Risk group 2) (IEC 62471)
Estimated light
source life (Note3)		 20,000 hours (when the LED temperature inside the head is 60℃ 140℉)
Cable length 0.2 m 0.656 ft
A connection cable is required to connect the high-output head to a UJ series controller.
Ambient operating temperature /
ambient operating humidity		 +5 to +35℃ +41 to +95℉ / 30 to 85 % RH (No dew condensation allowed)
Storage temperature and humidity –10 to +60℃ +14 to +140℉ / 30 to 85 % RH (No dew condensation or icing allowed)
Note:1)The values were measured using a UJ30/35 illuminometer with ø1 mm ø0.039 in sensor hole when the high-output heads were fixed to the attachment, the ambient temperature was maintained at 25℃ 77℉ by the UJ30/35, and they were turned on with 100% output (initial value: based on Panasonic's reference measurement method).
Since the LED elements show illumination intensity fluctuations, the actual UV intensity may be more than 20% higher.
2)It is recommended that protective glass (ANUJ6430) be used to protect the head-side lens from contamination when the high-output head is used without a lens. For further information about protective glass, contact our sales office.
3)The value is not a guaranteed value.

ANUJ6170 series

Standard head (Note1) Product No. ANUJ6172
Cable length 1.9m 6.234ft (ANUJ6172), directly connectable to the controller
Compatible lens Spot diameter ø3mm 0.118in ø4mm 0.157in ø6mm 0.236in ø8mm 0.315in ø10mm 0.394in
Product No. ANUJ 6423 ANUJ 6424 ANUJ 6426 ANUJ 6428 ANUJ 6420
Irradiation intensity (mW/cm2) (Note2) 9,300 7,900 3,600 1,700 640
Irradiation distance 10mm 0.394in 12mm 0.472in 20mm 0.787in 25mm 0.984in 30mm 1.181in
Common item Light source Class 3B LED product
Estimated lamp life (Note3) 20,000 hours (When the temperature of the LED in the head is 60℃ 140℉ or less.)
Operating temperature and humidity +5 to +35℃+41 to +95℉ , 30 to 85% RH (No condensation at 25℃ 77℉ )
Storage temperature and humidity -10 to +60℃+14 to +140℉ , 30 to 85% RH (No condensation at 25℃ 77℉ )
Note:1) The cable for standard heads is supplied in a fixed length.
2) When being fixed to the metal attachment, the ambient temperature is 25℃ 77℉ , and the intensity is set to 100% (initial value).
3) Not a guarateed value.
4) ANUJ6170 series except ANUJ6172 have been discontinued on June 30, 2014. If the specifications of ANUJ6170 series are needed, please refer to the page of the heads (ANuUJ6170 series)(discontinued products).

I/O SPECIFICATIONS

Input specifications

Input specifications
Open collector (Tr) or
non-voltage input such as a relay

Contact input

Contact inpu

Non-contact input

Non-contact input

Output specifications

Output specifications
Rated operation voltage:
5 to 24 V DC
Output capacity: 100 mA (max.)

With external power supply

With external power supply

With internal power supply

With internal power supply
INPUT OUTPUT
Terminal No. Signal Terminal No. Signal
1 START1 13 READY-All
2 START2 14 READY / BUSY1 (Note 2)
3 START3 15 READY / BUSY2 (Note 2)
4 START4 16 READY / BUSY3 (Note 2)
5 TYPE Chg1 (Note 1) 17 READY / BUSY4 (Note 2)
6 TYPE Chg2 (Note 1) 19 ERROR
7 TYPE Chg3 (Note 1) 20 ALARM
8 UV CHECK (Note 1) 21 COM
9 STOP 22 COM
10 START-All 23 FG
11 INTERLOCK (Note 3) 24 +5 V DC
12 COM 25 COM
Notes: 1) Nos. 5 / 6 / 7 / 8 (Type-Chg 1 / 2 / 3 and UV-CHECK) are functions
available UJ35 only. These terminals for UJ30 are spare.
2)The READY / BUSY switching of Nos. 14 / 15 / 16 / 17 is performed on the
UJ30 / UJ35 controller.
3)At shipment, for B-contact (allows irradiation when ON), No.11
(INTERLOCK) is connected to No.12 (COM) by a short-circuit line.

Return to top

Specifications
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



Related Information
Service & Support

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)