Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Wire-Saving Systems > Picking Switch for Shutter SL-VPK02 > Part Number > SL-VPK02
*Photo may vary from actual product.
Product Number | SL-VPK02 |
Part Number | SL-VPK02 |
Product | Picking switch |
Product name | Picking Switch for Shutter SL-VPK02 |
As of June 08, 2024
Specifications and design of the products are subject to change without notice for the product improvement.
Item | Specifications |
---|---|
Product Number | SL-VPK02 |
Part Number | SL-VPK02 |
Supply voltage | 24 V DC ± 10 % (Supplied from a S-LINK V control unit. A separate power supply is also available.) |
Current consumption | 24 V DC line: 25 mA or less (When the lamp is ON) Current for shutter operation: 450 mA or less |
Communication specification | Complies with S-LINK V protocol. |
Communications mode | B mode, C mode |
Address setting | Input address (lever switch) : 0 to 255 Output address (lamp, shutter) : Select an offset of +32, +64, +128, or +256 from the input address. (Note) : Using optional remote controller. |
Lever switch (Input) | Turns ON when lever switch is tilted to angle of 15° to 30° or pulled downward for a distance of about 2 mm 0.079 in or more. (Note) Pulling load is 19.6N or less. Make sure that stress by forcible bend or pulling is not applied directly to the lever part. |
Lamp (Output) | Lamp (LED) color: Selectable from green (default), red, blue or 2-stage indication (green, blue) ・Turns ON when output signal from signal transmission line turns ON. ・Turns OFF when output signal from signal transmission line turns OFF. |
Recommended shutter | Material: Danpla (plastic board) Maximum thickness: 5 mm 0.197 in Maximum weight: 50 g approx. Recommended size: W300 x H210 mm W11.811 x H8.268 in |
Ambient temperature | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation) . Storage: -20 to +60 ℃ -4 to +140 ℉ |
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Material | Front cover: Polycarbonate Lamp cover: Polycarbonate Rear case: ABS Pipe mounting holder: Cold rolled carbon steel (SPCC) Driving shaft: SUM Arm: Cold rolled carbon steel (SPCC) |
Cable | 4-core cabtyre cable, 0.15 m 0.492 ft long (With a snap male connector SL-CP2) |
Net weight | 250g approx. |
To Be Discontinued
Product Number | SL-VAR1 |
Part Number | SL-VAR1 |
Product | Address setting remote controller |
Product name | Remote controller |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)