AUTOMATION
CONTROLS

Search
Discontinued
Products



DP-102ZL3-M-P-C | Dual Display Digital Pressure Sensor [For Gas] DP-100L


Dual Display Digital Pressure Sensor [For Gas] DP-100L

*Photo may vary from actual product.

  • RoHS Compliant This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.  


Product Number DP-102ZL3-M-P-C
Part Number DP-102ZL3-M-P-C
Product Dual Display Digital Pressure Sensor [For Gas]
Details M12 connector type
Product name Dual Display Digital Pressure Sensor [For Gas] DP-100L

As of April 20, 2024
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Product Number DP-102ZL3-M-P-C
Part Number DP-102ZL3-M-P-C
Regulatory compliance and certification CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL/c-UL Certification
Type of pressure Gauge pressure
Rated pressure range -0.100 to +1.000 Mpa
Set pressure range -0.101 to +1.010MPa
Pressure withstandability 1.5MPa
Applicable fluid Non-corrosive gas
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power consumption Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 480 mW or less at STD (Current consumption 20 mA or less at 24 V supply voltage)
360 mW or less at FULL (Current consumption 15 mA or less at 24 V supply voltage)
Communication output (C/Q):IO-Link communication IO-Link Specification V1.1
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Communication output (C/Q):Baud rate COM3 (230.4 kbps)
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Communication output (C/Q):Process data 4 byte
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Communication output (C/Q):Minimum cycle time 1.0ms
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Control output (DO) PNP open-collector transistor
•Maximum source current: 50 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 50 mA source current)
Control output (DO):Output operation N.O./N.C. (selectable by key operation)
Control output (DO):Output operationOutput modes EASY mode / Hysteresis mode / Window comparator mode
Control output (DO):Hysteresis Minimum 1 digit (variable)
Control output (DO):Repeatability ±0.2 % F.S. (within ±2 digits)
Control output (DO):Response time 2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable by key operation
Control output (DO):Short-circuit protection Incorporated
Display 4 digits + 4 digits 3-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)
Display:Displayable pressure range -0.101 to +1.010MPa
Output indicator Orange LED(Output operation indicator 1: Flashes during IO-Link communication, Lights up when the control output is ON during non-IO-Link communication (synchronized with the output operation indicator 2)
Output operation indicator 2: Lights up when the control output is ON)
Protection IP40(IEC)
Ambient temperature -10 to +50℃ +14 to +122 ℉(No dew condensation or icing allowed), Storage: -10 to +60℃ +14 to +140 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 50 MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each(when panel or flat attachment is mounted: 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each)
Shock resistance 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Temperature characteristics Within ±1 % F.S.
(at +20℃ +68℉)
Pressure port M5 female thread
Material Enclosure: PBT (glass fiber reinforced), LCD display: Acrylic, Pressure port: Stainless steel (SUS303) , Mounting threaded part: Brass (nickel plated), Switch part: Silicone rubber
Connecting method Connector
Cable length Total length up to 20 m 65.617 ft (Condition of CE compliance less than 20 m 65.617 ft) is possible with 0.3 mm2, or more, cable.
Weight Net weight: 30 g approx., Gross weight: 95 g approx.
Accessories Dedicated M12 connector cable, 0.3 m 0.984 ft long: 1 pc.
Remark (Note:)measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20℃ +68℉.

Return to top

Accessories (Option)

no_image
Product Number CN-14A
Part Number CN-14A
Product name Connector
no_image
Product Number CN-14A-C1
Part Number CN-14A-C1
Product name Connector-attached cable
no_image
Product Number CN-14A-C2
Part Number CN-14A-C2
Product name Connector-attached cable


More



Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)