Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Measurement Sensors
> Measurement Sensors
> Contact-Type Digital Displacement Sensor HG-S
> Part Number
> HG-S1050
HG-S1050 | Contact-Type Digital Displacement Sensor HG-S
|
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
| Product Number | HG-S1050 |
| Part Number | HG-S1050 |
| Product | Contact-Type Digital Displacement Sensor |
| Details | 50 mm 1.969 in type General purpose Standard type |
| Product name | Contact-Type Digital Displacement Sensor HG-S |
As of May 06, 2024
Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
| Item | Specifications |
|---|---|
| Product Number | HG-S1050 |
| Part Number | HG-S1050 |
| Regulatory compliance | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Applicable controller | HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113 (Note) : Always connect the 50 mm 1.969 in type (HG-S1050) to an HG-SC□ controller manufactured February 2019 or later. |
| Position detection method | Optical absolute linear encoder method |
| Measuring range | 50 mm 1.969 in |
| Stroke | 50.5 mm 1.988 in or more |
| Measuring force : Downward mount | 3.8 N or less (50 mm 1.969 in pressing position) 1.9 N (intermediate position) (Note) : Typical value near center of measurement. |
| Measuring force : Upward mount | 3.2 N or less (50 mm 1.969 in pressing position) 1.4 N (intermediate position) (Note) : Typical value near center of measurement. |
| Measuring force : Side mount | 3.4 N or less (50 mm 1.969 in pressing position) 1.7 N (intermediate position) (Note) : Typical value near center of measurement. |
| Resolution | 0.5 μm 0.020 mil |
| Sampling rate | 1 ms |
| Indication accuracy(P-P) | Full range: 3.5 μm 0.138 mil or less |
| Tip deviation amount | 40 μm 1.575 mil or less (typical) (Note) : Value calculated from the clearance of the upper and lower plain bearings. |
| Hot swap function | Incorporated |
| Operation indicator | 2-color LED (Orange / Green) |
| Pollution degree | 2 |
| Operating altitude | 2,000 m 6561.68 ft or less (Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Environmental resistance : Protection | IP67 (IEC) (Note) : Excludes damage and deterioration to rubber bellows due to external causes. |
| Environmental resistance : Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No condensation or icing allowed), Storage: -20 to +60 ℃ -4 to +140 ℉ |
| Environmental resistance : Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Insulation resistance | 100 MΩ or more at 250 V DC |
| Environmental resistance : Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each |
| Environmental resistance : Shock resistance | 980 m/s2 acceleration in X, Y and Z directions three times each |
| Grounding method | Capacitor grounding |
| Material | Body: Aluminum alloy, Holder: Free-cutting steel, Spindle: Carbon tool steel, Probe (Note): Brass (body) / Ceramic (ball), Rubber bellows: NBR (black) (Note) : The probes (optional) are also available. |
| Weight | Main unit weight: 180 g approx. |
| Accessory | Sensor head fastening wrench 1 pc., Mounting nut 1 pc. |
| Remark | Where measurement conditions have not been specified precisely, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature +20 ℃ +68 ℉, and a clean atmosphere where dust and liquids such as water and oil do not come in contact with the equipment. |
Accessories (Option)
|
| Product Number | CN-HS-C10 |
| Part Number | CN-HS-C10 |
| Product name | Mating cable |
|
|
| Product Number | CN-HS-C10L |
| Part Number | CN-HS-C10L |
| Product name | Mating cable |
|
|
| Product Number | CN-HS-C20 |
| Part Number | CN-HS-C20 |
| Product name | Mating cable |
BY EMAIL
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
