LX-101-Z | Digital Mark Sensor LX-100

Digital Mark Sensor LX-100

*Photo may vary from actual product.

  • RoHS Compliant This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.  

Product Number LX-101-Z
Part Number LX-101-Z
Product Digital Mark Sensor
Details Plug-in connector type
Product name Digital Mark Sensor LX-100

As of May 23, 2022
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Product Number LX-101-Z
Part Number LX-101-Z
Regulatory compliance EMC Directive, RoHS Directive
Sensing range 10 ± 3 mm 0.394 ± 0.118 in
Spot size 1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)
Output 1(OUT) NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 100 mA sink current)
Output 1:Short-circuit protection Incorporated
Output 1:Output operation Mark mode: Light-ON / Dark-ON (Auto-setting on teaching)
Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)
Output 2(OUT) -
Output 2:Short-circuit protection -
Output 2:Output operation -
Response time Mark mode: 45 micro s or less
Color mode: 150 micro s or less
Teaching input NPN non-contact input
- Signal condition: High... +5 V to +V, or open, Low... 0 to +2 V (source current: 0.5 mA or less)
- Input impedance: 10 kOhm approx.
Digital display 4-digit red LED display
Sensitivity setting Mark mode: 2-level teaching / Full-auto teaching
Color mode: 1-level teaching
Fine sensitivity adjustment function Incorporated
Timer function Incorporated with variable ON-delay / OFF-delay timer,
switchable either effective or ineffective
(Timer period: 1 to 500 ms, 9 levels variable)
Protection IP67 (IEC)
Ambient temperature -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directionsthree times each
Emitting element Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)
Material Enclosure: PBT
Display cover: Polycarbonate
Operation buttons: Silicone rubber
Lens: Glass
Lens holder: Aluminum
Cable (Note) Mating cable is not supplied with the plug-in connector type. Please order it separately.
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Weight Net weight: 55 g approx.
Gross weight: 120 g approx.
Accessory M4 (length 30 mm 1.181 in) screw with washers: 2 pcs.

Return to top

Accessories (Option)

Product Number CN-24B-C2
Part Number CN-24B-C2
Product name Mating cable
Product Number CN-24B-C5
Part Number CN-24B-C5
Product name Mating cable
Product Number CN-24BL-C2
Part Number CN-24BL-C2
Product name Mating cable


Return to top

If you have any questions, please select the option below to contact us or find answers.

Return to top

Please click your area to select country or region



Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)