Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Sensors
> Photoelectric Sensors / Laser Sensors
> Compact Multi-voltage Photoelectric Sensor NX5
> Part Number
> NX5-M30B
NX5-M30B | Compact Multi-voltage Photoelectric Sensor NX5
|
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
- To Be Discontinued
September 30, 2025
| Product Number | NX5-M30B |
| Part Number | NX5-M30B |
| Product | Compact Multi-voltage Photoelectric Sensor |
| Details | Thru-beam [Long sensing range] |
| Product name | Compact Multi-voltage Photoelectric Sensor NX5 |
-
-
-
-
Sorry, no suggested alternative products.
As of April 19, 2024
Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
| Item | Specifications |
|---|---|
| Product Number | NX5-M30B |
| Part Number | NX5-M30B |
| Regulatory compliance | ・Low Voltage Directive ： EN IEC 60947-5-2 ・EMC Directive ： EN IEC 60947-5-2 ・RoHS Directive ・GB/T 14048.10 |
| Sensing range | 30 m 98.425 ft |
| Sensing object | dia. 20 mm dia. 0.787 in or more opaque object (Completely beam interrupted object) (Note) If slit masks (optional) are fitted, an object as small as 3 x 6 mm 0.118 x 0.236 in can be detected. |
| Hysteresis | - |
| Repeatability(perpendicular to sensing axis) | 0.2 mm 0.008 in or less |
| Supply voltage | 24 to 240 V AC +10-15 % or 12 to 240 V DC +10-15 % Ripple P-P 10 % or less |
| Power consumption | Emitter: 1.5 VA or less Receiver: 2 VA or less |
| Output | Relay contact 1 c - Switching capacity: 250 V AC 1 A (resistive load), 30 V DC 2 A (resistive load) - Electrical life: 500,000 or more switching operations (switching frequency 3,600 operations/hour), 100,000 or more switching operations (switching frequency 3,600 operations/hour) - Mechanical life: 100 million or more switching operations (switching frequency 36,000 operations/hour) |
| Output:Output operation | Dark-ON |
| Response time | 10 ms or less |
| Operation indicator | Red LED (lights up when the output is ON) |
| Stability indicator | Green LED (lights up under stable light received condition or stable dark condition) |
| Power indicator | Red LED (lights up when the power is ON) |
| Sensitivity adjuster | - |
| Automatic Interference prevention function | - |
| Pollution degree | 3 (Industrial environment) |
| Protection | IP66 (IEC) |
| Ambient temperature | –20 to +55 ℃ –4 to +131 ℉ (No dew condensation or icing allowed) (Note), Storage: –30 to +70 ℃ –22 to +158 ℉ (Note):In case the sensor is to be used at an ambient temperature of –15 ℃ +5 ℉, or less, please contact our office. |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient illuminance | Incandescent light: 3,500 Lx or less at the light-receiving face |
| Voltage withstandability | 1,500 V AC for one min. between all supply terminals connected together and enclosure, 1,500 V AC for one min. between power supply and output terminals, 1,000 V AC for one min. between relay contact terminals |
| Insulation resistance | 20 MOhm , or more, with 500 V DC megger between power supply and output terminals, and between relay contact terminals |
| Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions two hours each |
| Shock resistance | 500 m/s2 (50 G approx.) in X, Y and Z directions three times each |
| Emitting element | Infrared LED (modulated) |
| Emitting element:Peak emission wavelength | 880 nm 0.035 mil |
| Material | Enclosure: Polycarbonate Lens: Polycarbonate Cover: Polycarbonate |
| Cable | 0.3 mm2 5-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long |
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver). |
| Weight | Emitter: 125 g approx Receiver: 140 g approx |
| Accessory | - |
Low Voltage Directive related information
| Item | Specifications |
|---|---|
| Utilization category | AC-12/DC-12 |
| Impulse withstand voltage | 2.5kV |
| Output minimum operational current | DC5V 1mA or more |
| Turn on time / Turn off time | 10ms / 10ms Note : Turn-On time and Turn-OFF time are the delay time between reference sensor and measurement sensor in case round plate rotates as below. |
| Maximum response frequency | 50Hz Note:The maximum response frequency is the value calculated below. Maximum response frequency = １ / (Turn on time＋Turn off time) |
| Pollution degree | 3 (Industrial environment) |
| Class of protection against electric shock | Out of classification |
| Excess gain | 30% |
| Note | Note 1 : Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. Note 2 : The output applied voltage should be the same as the supply voltage of the sensor. Note 3 : Be sure to add a short-circuit protection (a fuse or a breaker) to the power supply input and the output.. In addition, use 3A or less fast blow fuse or breaker. |
Accessories (Option)
BY EMAIL
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
