Business > Industrial Devices > Automation Controls Top > RX2-M5
*Photo may vary from actual product.
Product Number | RX2-M5 |
Part Number | RX2-M5 |
Product | Robust Photoelectric Sensor |
Details | DC 2-wire type Thru-beam |
Product name | Robust Photoelectric Sensor RX(Discontinued) |
Item | Specifications |
---|---|
Product Number | RX2-M5 |
Part Number | RX2-M5 |
Regulatory compliance | EMC Directive, RoHS Directive |
Sensing range | 5 m 16.404 ft |
Sensing object | dia. 10 mm dia. 0.394 in or more opaque object (Note) If slit masks (optional) are fitted, an object of 0.5 x 5 mm 0.020 x 0.197 in can be detected. |
Hysteresis | - |
Repeatability(perpendicular to sensing axis) | 0.5 mm 0.020 in or less |
Supply voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
Current consumption | Emitter: 8 mA or less Receiver: 0.8 mA or less (Note) It is the leakage current when the output is in the OFF state. |
Sensing output | Non contact DC 2-wire type - Load current: 5 to 100 mA - Residual voltage: 4 V or less (Note) (Note) When extending the cable, the residual voltage will be increased depending on the type of cable used. Verify the residual voltage when extending the cable. |
Sensing output:Output operation | Switchable either Light-ON or Dark-ON |
Sensing output:Short-circuit protection | Incorporated |
Response time | 3 ms or less |
Operation indicator | Red LED (lights up when the output is ON) |
Stability indicator | Green LED (Light-ON mode: lights up under stable light received condition, Dark-ON mode: lights up under stable dark condition) |
Emitting indicator | Red LED (lights up during beam emission) |
Sensitivity adjuster | Continuously variable adjuster |
Protection | IP67 (IEC) |
Ambient temperature | -20 to +60 degrees -4 to +140 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit |
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Ambient illuminance | Incandescent light: 3,500 Lx or less at the light-receiving face |
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Insulation resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each |
Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
Emitting element | Infrared LED (modulated) |
Emitting element:Peak emission wavelength | 880 nm 0.035 mil |
Material | Enclosure: Die-cast zinc alloy Indicator cover: Polyethersulphone Lens: Polycarbonate |
Cable | 0.15 mm2 2-core oil, heat and cold resistant cabtyre cable, 2 m 6.562 ft long |
Cable extension | - (Note) When extending the cable, the residual voltage will be increased depending on the type of cable used. Verify the residual voltage when extending the cable. |
Weight | Emitter: 70 g approx Receiver: 70 g approx |
Accessory | MS-RX-1 (Sensor mounting bracket): 1 set for emitter and receiver Adjusting screwdriver: 1 pc |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)