Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Energy Management Solutions
> Energy Management Solutions
> Control Unit ELC500
> Part Number
> UELC500
UELC500 | Control Unit ELC500
|
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
- To Be Discontinued
September 30, 2024
| Product Number | UELC500 |
| Part Number | UELC500 |
| Product name | Control Unit ELC500 |
-
-
-
-
Sorry, no suggested alternative products.
As of April 26, 2024
Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
| Item | Specifications |
|---|---|
| Product Number | UELC500 |
| Part Number | UELC500 |
Main unit specifications
| Item | Specifications |
|---|---|
| Rated operating voltage | 24 V DC |
| Current consumption | 300 mA or less Note : Regarding system consumption current, see the User’s Manual for ELC500 Control Unit. |
| Ambient temperature | 0 to ＋55 ℃ +32 to+131 ℉ |
| Ambient humidity | 10 to 95% RH(at +25 ℃ +77 ℉, no dew condensation allowed) |
| Serial communication | Ethernet: 1 port, RS-232C: 1 port, RS-485 / 422: 2 ports |
| Compatible regulations | Low Voltage Directive, EMC Directive, RoHS Directive |
External memory specifications
| Item | Specifications |
|---|---|
| Supported media | SD memory card |
| Compatible format | Compatible with SD / SDHC standards (FAT16 and FAT32 only) |
| Capacity | 2 to 32 GB |
| Speed class | Class 2 to Class 10 |
| Remark | Notes : 1) If a (momentary) power outage occurs during writing, data can become corrupted. Use of UPS (Uninterruptible Power Supply) is recommended. 2) Use of Panasonic's industrial SD memory card (SLC memory card) is recommended. For the handling of SD memory card, see the User's Manual for ELC500 Control Unit. |
Main specifications
| Item | Specifications |
|---|---|
| Communication(Downstream communication) | • Ethernet: 1 port [supported protocols: MEWTOCOL-COM, Modbus TCP; number of nodes: 197 units; number of simultaneous connections: 20] • RS-232C: 1 port [supported protocols: MEWTOCOL-COM, Modbus RTU, general-purpose communication] • RS-485 / 422: 2 ports [supported protocols: MEWTOCOL-COM, Modbus RTU, PLC link, general-purpose communication] Note : Ethernet is a registered trademark of Fuji Xerox Co., Ltd. and Xerox Corporation in the U.S. Modbus protocol is a communication protocol developed by Modicon Inc. for use with programmable logic controllers (PLCs). |
| Data collection (logging) function | • Stored data: Instantaneous values, differential values • Data storage location, storage format: SD / SDHC memory card, CSV file format • Maximum number of registerable points: 512 points/16 files (Up to 16 files can be registered. Up to 128 points can be registered in 1 file.) • Number of storable files: 100 files |
| Demand monitoring function | • Demand type: Constant-cycle (15 / 30 / 60 min) demand; demand cycle: 5 sec (high speed)/min, IEC demand (Note 1) (demand / interval time span: 1 to 60 min) • Total number of demand monitoring target units: 50 units • Number of registerable I/O control devices / control patterns: 16 points / alarm-linked control, startup control, cyclic control (ON/OFF control for all) (Note 2) Notes : 1) Demand in compliance with IEC 61557-12, “Performance measuring and monitoring devices (PMD)” 2) Use ECOnect® series remote I/O units (UENU2D4R12). |
| Network function | • Communication protocols: TCP/IP, UDP/IP • Application protocols: SMTP (SMTP AUTH supported), FTP (client / server), SNTP, DHCP, DNS, HTTP (server) |
| Email transmission function | • Number of registerable points: 16 points • Subject title: 64 half-width characters (32 full-width characters), Message: 256 half-width characters (128 full-width characters) |
| Others | • Web server function: Custom Web region, 8 MB (Control Web Creator is required), number of simultaneous sessions: 16 • Extension function: Addition of FP7 (PLC) units enables acquisition of information such as I/O signals, analog data and temperature data. Maximum of 8 units (Note) • Program function: 32-k steps Programming is possible when Control FPWIN Pro7 is used. (Note) The number of connectable units is limited. For details, refer to the ELC500 Control Unit Specifications or manual. |
Accessories (Option)
BY EMAIL
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
