【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Energy Management Solutions > Communication Devices > KS1(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
Item | Specifications | |
---|---|---|
Rated voltage |
24 V DC |
|
Operating voltage range |
90 to 110%V of rated voltage (21.6 to 26.4 V DC) |
|
Rush current |
12 A or less |
|
Current consumption |
100 mA or less |
|
Allowed momentary power off time |
10 ms |
|
Fuse |
Built-in type |
|
Terminal screw |
M2 |
|
Ambient temperature |
0 to 55°C |
|
Storage temperature |
-20 to +75°C |
|
Ambient humidity |
30 to 85% RH (at 20°C, non-condensing) |
|
Breakdown voltage |
500 V AC 1 minute |
RS485 terminals ⇔
Combined power
and ground terminals |
Insulation resistance |
100 Mohm or higher (500 V DC using
an insulation resistance meter) |
|
Vibration resistance |
10 to 55 Hz, 1 cycle/min.: double amplitude of 0.75 mm, 1 hour on 3 axes |
|
Shock resistance |
294 m/s2 or more, 5 times on 3 axes |
|
Dimensions |
25 X 60 X 90 |
|
Weight |
Approx. 80 g |
Item | Specifications | ||
---|---|---|---|
Interface |
RS-232C (non-insulated) |
RS-485 (insulated) |
|
Conversion COM port*1 |
COM1 |
COM2 |
|
Communication style |
1:1 communication |
1:N communication |
|
Number of connection units |
1 unit |
Max. 99 units |
|
Communication method |
Full duplex system |
Half-duplex operation |
|
Synchronous system |
Synchronous communication method |
||
Transmission distance |
15 m 49 ft |
Max. 1,200 m 3,937 ft*2,3 |
|
Transmission speed |
2,400 / 4,800 / 9,600 / 19,200 / 38,400 / 57,600 / 115,200 bps |
||
Connection connector quantity |
Max. 3 |
||
COM reception time-out |
Setting range 10 ms to 300 s |
||
Non-transmission connection cut-off time |
Setting range: 0 to 1800 s
(Setting value of 0 is not cut off) |
||
Transmission format |
Data length |
8 bit fixed |
|
Parity |
Odd / even / none |
||
Stop bit |
1 bit/2 bit |
||
Terminator code |
CR / CR+LF / None |
||
Serial ⇔ Ethernet conversion format |
Command response format |
*1 | COM1 and COM2 can be used simultaneously. |
---|---|
*2 | When connecting a commercially available device, please confirm operation using the actual device. In some case, the number of stations, transmission distance, and communication speed vary depending on the connected device. |
*3 | The values for the transmission distance, communication speed and number of stations should be within the values noted in the graph. |
Item | Specifications | |
---|---|---|
Interface |
IEEE802.3u, 10BASE-T/100BASE-TX |
|
Connector shape |
RJ45 |
|
Transmission
specifications |
Transmission speed |
10Mbps / 100Mbps |
Transmission method |
Base band |
|
Max. segment length |
100 m |
|
Communication cable |
Category 5 UTP cable |
|
Protocol |
Modbus TCP (RTU, ASCII), TCP/IP |
|
Functions |
Auto negotiation function,
MDI/MDI-X, Auto crossover function |
* Ethernet is a registered trademark of Xerox Corporation.
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)