AUTOMATION
CONTROLS

Search
Discontinued
Products



3D Control FAYb Laser Marker LP-M

Specifications

LP-M500

Model No. LP-M500 LP-M500-S LP-M505 LP-M505-S
CE marking directive compliance Low Voltage Directive, EMC Directive, RoHS Directive
Work distance 190 ± 22 mm 7.480 ± 0.866 in 220 ± 22 mm 8.661 ± 0.866 in
Marking field 120 × 120 mm 4.724 × 4.724 in 220 × 220 mm 8.661 × 8.661 in
Marking laser Class 4 Yb fiber laser; λ= 1,064 nm 0.0419 mil laser
  Average output*1 40 W ± 5 % (pulse oscillation)
Guide laser / pointer Red semiconductor laser; λ= 655 nm 0.026 mil; Class 2 laser: Maximum output 1 mW or less
Scanning method X-, Y- and Z-axis directions; 3D scanning method
Scan speed Maximum 12,000 mm/sec. 472.441 in/sec.
Character settings
(character height, width)
0.1 to 120 mm 0.004 to 4.724 in
(configurable in 0.001 mm 0.0004 in steps)
0.1 to 220 mm 0.004 to 8.661 in
(configurable in 0.001 mm 0.0004 in steps)
Setting range
(Straight Line,
Proportional,
Justify
Character spacing 0 to 120 mm 0 to 4.724 in 0 to 220 mm 0 to 8.661 in
Line pitch
Setting range
(Arc)
Radius 0 to 999.999 mm 0 to 39.370 in
(configurable in 0.001 mm 0.0004 in steps)
Angle -180° to +180°(configurable in 0.01°steps)
Line pitch
radius
0 to 120 mm 0 to 4.724 in
(configurable in 0.001 mm 0.0004 in steps)
0 to 220 mm 0 to 8.661 in
(configurable in 0.001 mm 0.0004 in steps)
Logo data VEC*2, DXF, BMP, HPGL, JPEG, AI, EPS
Marking shape Straight Line, Propotional, Justify, Arc
Character types English uppercase letters, English lowercase letters, numerals, katakana, hiragana, kanji (JIS No. 1 and No. 2 standards), symbols, user-registered characters (up to 50)
Barcodes CODE39, CODE128, ITF, NW-7, EAN / UPC, GS1 DataBar (GS1 DataBar Limited, GS1 DataBar Stacked, etc.), GS1 composite code (GS1 DataBar Limited CC-A, GS1 DataBar Stacked CC-A, GS1-128 CC-A, etc.)
2D codes QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix
I/O port I/O terminal, I/O connector, interlock connector, displacement sensor input connector, laser gate terminal (-S type only)
Serial communication interface EIA-RS-232C, Ethernet
Displacement sensor input Analog current input (4 to 20 mA)
Cooling method Head: Naturally air cooling, Controller: Forced air cooling
Power supply 90-132 V AC, or 180-264 V AC (including voltage fluctuation range of ±10 %) , 50/60 Hz(Auto-switching)
Power consumption 580 VA or less (100 V AC), 720 VA or less (200 V AC)
Laser gate Not equipped Equipped in Head Not equipped Equipped in Head
Ambient temperature 0 to +40 ℃ +32 to +104 ℉( Controller, Head)
(No dew condensation or icing allowed)
Storage ambient temperature -10 to +60 ℃ +14 to +140 ℉( Controller, Head)
(No dew condensation or icing allowed)
Ambient humidity 35 % to 85 % RH (Controller, Head)
(No dew condensation or icing allowed)
Protection degree IP64*3
Net
weight
Head 12 kg
Controller 28 kg

*1 Output at product processing edge (at configured power of 100, standard factory settings).
*2 File format (logo file) that can be used by the laser marker.
*3 The head is IP64 only in regions where an electrical or optical part is deployed.

・China models are available,too. Please contact our sales office.

LP-M200

Model No. LP-M200 LP-M200-S LP-M205 LP-M205-S
CE marking directive compliance Low Voltage Directive, EMC Directive, RoHS Directive
Work distance 190 ± 22 mm 7.480 ± 0.866 in 220 ± 22 mm 8.661 ± 0.866 in
Marking field 120 × 120 mm 4.724 × 4.724 in 220 × 220 mm 8.661 × 8.661 in
Marking laser Class 4 Yb fiber laser; λ= 1,064 nm 0.0419 mil laser
  Average output*1 16 W ± 5 % (pulse oscillation)
Guide laser / pointer Red semiconductor laser; λ= 655 nm 0.026 mil; Class 2 laser: Maximum output 1 mW or less
Scanning method X-, Y- and Z-axis directions; 3D scanning method
Scan speed Maximum 12,000 mm/sec. 472.441 in/sec.
Character settings
(character height, width)
0.1 to 120 mm 0.004 to 4.724 in
(configurable in 0.001 mm 0.0004 in steps)
0.1 to 220 mm 0.004 to 8.661 in
(configurable in 0.001 mm 0.0004 in steps)
Setting range
(Straight Line,
Proportional,
Justify)
Character spacing 0 to 120 mm 0 to 4.724 in 0 to 220 mm 0 to 8.661 in
Line pitch
Setting range
(Arc)
Radius 0 to 999.999 mm 0 to 39.370 in
(configurable in 0.001 mm 0.0004 in steps)
Angle -180° to +180°(configurable in 0.01°steps)
Line pitch
radius
0 to 120 mm 0 to 4.724 in
(configurable in 0.001 mm 0.0004 in steps)
0 to 220 mm 0 to 8.661 in
(configurable in 0.001 mm 0.0004 in steps)
Logo data VEC*2, DXF, BMP, HPGL, JPEG, AI, EPS
Marking shape Straight Line, Propotional, Justify, Arc
Character types English uppercase letters, English lowercase letters, numerals, katakana, hiragana, kanji (JIS No. 1 and No. 2 standards), symbols, user-registered characters (up to 50)
Barcodes CODE39, CODE128, ITF, NW-7, EAN / UPC, GS1 DataBar (GS1 DataBar Limited, GS1 DataBar Stacked, etc.), GS1 composite code (GS1 DataBar Limited CC-A, GS1 DataBar Stacked CC-A, GS1-128 CC-A, etc.)
2D codes QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix
I/O port I/O terminal, I/O connector, interlock connector, displacement sensor input connector, laser gate terminal (-S type only)
Serial communication interface EIA-RS-232C, Ethernet
Displacement sensor input Analog current input (4 to 20 mA)
Cooling method Head: Naturally air cooling, Controller: Forced air cooling
Power supply 90-132 V AC, or 180-264 V AC (including voltage fluctuation range of ±10 %) , 50/60 Hz(Auto-switching)
Power consumption 390 VA or less (100 V AC), 510 VA or less (200 V AC)
Laser gate Not equipped Equipped in Head Not equipped Equipped in Head
Ambient temperature 0 to +40 ℃ +32 to +104 ℉( Controller, Head)
(No dew condensation or icing allowed)
Storage ambient temperature -10 to +60 ℃ +14 to +140 ℉( Controller, Head)
(No dew condensation or icing allowed)
Ambient humidity 35 % to 85 % RH (Controller, Head)
(No dew condensation or icing allowed)
Protection degree IP64*3
Net
weight
Head 12 kg
Controller 28 kg

*1 Output at product processing edge (at configured power of 100, standard factory settings).
*2 File format (logo file) that can be used by the laser marker.
*3 The head is IP64 only in regions where an electrical or optical part is deployed.

・China models are available,too. Please contact our sales office.

Software for PC Setting of Laser Marker

Software Supported OS*1
Laser Marker Utility*2 Microsoft Windows®10 Pro (32-bit / 64-bit) / 8.1 Pro (32-bit / 64-bit) / 7 Professional SP1(32-bit / 64-bit)
NAVILINK-3D*2
(sold separately)
Microsoft Windows®10 Pro (32-bit / 64-bit) / 8.1 Pro (32-bit / 64-bit) / 7 Professional SP1(32-bit / 64-bit)

*1 OS versions of which Microsoft has ended support are excluded.
*2 To use Export Vec, Adobe® Illustrator® must be installed. Please contact us about the version corresponding to Adobe® Illustrator®. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United State and other countries.

Precautions for Proper Use

■Laser safety

  • This product is classified as a Class 4 Laser Product in IEC/JIS/FDA regulations 21 CFR 1040.10 and 1040.11. Never look at or touch the direct laser beam and its reflection.
  • The following labels are attached to the LP-M500 series. Handle the product according to the instruction given on the warning labels. (Warning labels are not shown in the product photographs in this website.)
  • The laser used by this product generates infrared light that is invisible to the human eye. Use particular caution when the laser is operating.

■Maintenance

・Air filter: Regularly clean the air filter attached to the FAYb Laser Marker to maintain cooling effects.
・Laser pointer emission port: Dust or chips adhering to the laser pointer emission port may affect the printing quality or seriously damage the laser marker. Clean the laser pointer emission port regularly.

■Recommended use of a dust collector

  • Depending on the object being marked, harmful gasses or smoke that have a detrimental effect on the human body or the laser marker may be generating during marking. If your application falls under this description, use a dust collector.

*For more information, contact your sales representative.

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

FAQ


Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)