【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Programmable Controllers / Interface Terminal > Programmable Controllers / Interface Terminal > FP-XH > Specifications
|
AFPXHC14□ / AFPXHC30□ / AFPXHC60□
Item | Specifications | |||
---|---|---|---|---|
Operating ambient temperature | 0 to +55 ℃ +32 to +131 ℉ | |||
Storage ambient temperature | -40 to +70 ℃ -40 to +158 ℉ | |||
Operating ambient humidity | 10 to 95 % RH (at +25 ℃ +77 ℉, non-condensing) | |||
Storage ambient humidity | 10 to 95 % RH (at +25 ℃ +77 ℉, non-condensing) | |||
Breakdown voltage (Note) |
AC power supply | DC power supply | ||
Relay output | Between power supply terminal and earth terminal | 1,500 V AC for 1 minute | 500 V AC for 1 minute | |
Between power supply terminal and service power supply terminal | 1,500 V AC for 1 minute | - | ||
Between input terminal and earth terminal | 1,500 V AC for 1 minute | 500 V AC for 1 minute | ||
Between output terminal and earth terminal | 1,500 V AC for 1 minute | 1,500 V AC for 1 minute | ||
Transistor output |
Between power supply terminal and earth terminal | 1,500 V AC for 1 minute | 500 V AC for 1 minute | |
Between power supply terminal and service power supply terminal | 1,500 V AC for 1 minute | - | ||
Between input terminal and earth terminal | 1,500 V AC for 1 minute | 500 V AC for 1 minute | ||
Between output terminal and earth terminal | 500 V AC for 1 minute | 500 V AC for 1 minute | ||
Isolation resistance |
Between power supply terminal and earth terminal | 100 MΩ or more (500 V DC using an insulation resistance meter) |
||
Between power supply terminal and service power supply terminal | ||||
Between input terminal and earth terminal | ||||
Between output terminal and earth terminal | ||||
Vibration resistance |
5 to 8.4 Hz, 3.5 mm 0.138 in single amplitude 8.4 to 150 Hz, Acceleration 9.8 m/s2 10 min. each in the X, Y and Z directions (1 octave/min) |
|||
Shock resistance | 147 m/s2, 4 times each in the X, Y and Z directions | |||
Noise resistance | 1,000 V [P-P] with pulse widths of 50 ns and 1 μs (using a noise simulator) (Power supply terminal) |
|||
Operating condition | No corrosive gas and no excessive dust | |||
Applicable standard for EC directives |
EMC directive: EN 61131-2 (directive concerning emission, immunity and low voltage) |
|||
Over-voltage category | Category II | |||
Level of contamination | 2 |
Note: | Cut-off current 5 mA (Initial value at shipment) |
---|
AFPXHC14□ / AFPXHC30□ / AFPXHC60□
Item | Specifications | ||
---|---|---|---|
Programming method | Relay symbol | ||
Control method | Cyclic operation | ||
Program memory | Built-in Flash ROM | ||
Program capacity | C14: 16 k steps, C30 / C60: 24 k / 32 k / 40 k steps (switch-over) (Note 1) |
||
Basic instructions | Approx. 110 | ||
High-level instructions | Approx. 220 | ||
Operation speed | [Basic instruction (ST)] Approx. 0.04 μs/step (under 7 k steps) Approx. 0.7 μs/step (7 k steps or more) [High-level instruction (F0MV)] Approx. 0.22 μs/step (under 7 k steps) Approx. 1.73 μs/step (7 k steps or more) |
||
Operation memory |
Link relay |
External input (X) (Note 2) | 1,760 points (X0 to X109F) |
External output (Y) (Note 2) | 1,760 points (Y0 to Y109F) | ||
Internal relay (R) (Note 3) | Default: 8,192 points (R0 to R511F) FP-X compatible specifications: 4,096 points |
||
Special internal relay (R) | 240 points | ||
Timer / Counter (T / C) (Note 4) | 1,024 points (Initial settings Timer: 1,008 points, Counter: 16 points) | ||
Link relay (L) | 2,048 points (L0 to L127F) | ||
Memory area |
Data register (DT) | C14: 12 k words, C30 / C60: 64 k, 32 k, 12 k words * For C30 / C60, DT capacity varies according to the program capacity |
|
Special data register (DT) | 500 words | ||
Link data register (LD) | 256 words (LD0 to LD255) | ||
File register (FL) | None | ||
Index register (I) | 14 words (I0 to ID) | ||
Differential points | Points for program capacity | ||
Master control relay points (MCR) | 256 points | ||
Number of labels (JMP + LOOP) | 256 points | ||
Number of step ladders | 1,000 steps | ||
Number of subroutines | 500 subroutines | ||
Number of interrupt program | Transistor output type: Input 8, Constant 1 Relay output type: Input 11 (for C30 / C60: 14), Constant 1 |
||
High-speed counter (Note 5) (Note 6) |
Control unit input | [Transistor output type] Single-phase 8 channels (100 kHz × 4, 10 kHz × 4) or 2-phase 4 channels (50 kHz × 2, 10 kHz × 2) [Relay output type] Single-phase 8 channels (10 kHz × 8) or 2-phase 4 channels (10 kHz × 4) |
|
Pulse I/O with cassette installed |
[Transistor output type] Installation not possible [Relay output type] C14: Single-phase 2 channels (100 kHz × 2) or 2-phase 1 channel (50 kHz × 1) C30 / C60: Single-phase 4 channels (100 kHz × 4) or 2-phase 2 channels (50 kHz × 2) *with two cassettes installed |
||
Pulse output / PWM output (Note 5) (Note 6) |
Control unit output | [Transistor output type] C14: 3 channels, C30: 4 channels, C60: 6 channels [Pulse output] each 100 kHz [PWM output] 3 channels (C14), 4 channels (other than C14) 1 Hz to 70 kHz (Resolution of 1000) 70.001 kHz to 100 kHz (Resolution of 100) |
|
Pulse I/O with cassette installed |
[Relay output type] C14: 1 channel, C30 / C60: 2 channels *with two cassettes installed [Pulse output] each 100 kHz [PWM output] 1 channel (C14), 2 channels (other than C14) *with two cassettes installed 1 Hz to 70 kHz (Resolution of 1000) 70.001 kHz to 100 kHz (Resolution of 100) |
||
Pulse catch input Interrupt input (Note 6) |
[Transistor output type] 8 points (Control unit input: 8 points) [Relay output type] 14 points (Control unit input: 8 points, Pulse I/O cassette : 3 points × 2) |
||
Periodical interrupt (Note 6) | 0.1 ms to 30 sec. | ||
Potentiometer input | 1 channel (0 to 4,000) | ||
Input time constant processing | Available | ||
Clock / calendar | Available (only when the master memory cassette AFPX-MRTC and battery are installed) | ||
Flash ROM backup |
Backup by F12 / P13 instructions | All area of Data register | |
Automatic backup when power is off |
Counter: 16 points, Internal relay: 128 points, Data register: 315 words |
||
Battery backup | Memory set in hold area of system register (only when battery is installed) |
||
Battery lifetime | 5 years or more in the actual use condition (operating 8 hours a day) (Note 7) |
||
Password | Yes (Can be selected from 4 digits, 8 digits or 32 digits) | ||
Self-diagnostic function | Watchdog timer, program syntax check, etc. | ||
PLC link function | Max. 16 units, link relay: 1,024 points, link register: 128 words (Data transfer, remote programming: Not available) |
||
Rewriting in RUN mode | Available (downloading in RUN mode, program rewriting in RUN mode) (Max. 512 steps) |
Notes:
1) | When changing the system register No.0 (sequence program capacity), the data register (DT) capacity will also change. |
---|---|
2) | The number of points in the table is the number of points of operation memory. The number of points actually available to be used is determined by the hardware configuration. |
3) | Can be selected by the setting of the system register No. 1 (internal relay capacity). To provide compatibility with the conventional FP-X series control unit, select 4,096 points. |
4) | The number of timer points can be changed by the setting of the system register No.5. |
5) | The maximum counting speed and maximum output frequency for the high-speed counter, pulse output and PWM output indicate the specifications for the voltage of 24 V DC and ambient temperature of +25 ℃ +77 ℉. The frequency may decrease depending on voltage, temperature or combination of functions used. |
6) | The inputs and outputs used for each function of the high-speed counter, pulse output, PWM output, pulse catch input or interrupt input cannot be allocated in duplication. |
7) | Battery lifetime values is calculated when the power is not completely turned on. Since the actual value depends on conditions of use, in practice, the lifetime may be shorter. |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)