【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Sensor Options > High-functional Digital Panel Controller CA(Discontinued Products) > Specifications

High-functional Digital Panel Controller CA (Discontinued Products)

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

	September 30, 2008		Ultra-compact Digital Panel Controller CA2

Discontinued Products
Information

Specifications

Dimensions

Specifications

Type		Relay output	Transistor output
Type		Relay output		With BCD output
Basic model No.		CA-R□	CA-T□	CA-B□
Supply voltage		100 to 240 V AC ± 10 %
Power consumption		17 VA or less
Power supply for sensor		12V DC ⁺¹⁰/₀%、150mA
Analog input	Input range	CA-□1 : 4 to 20 mA, CA-□2 : 1 to 5 V, CA-□3 : ±1 V, CA-□4 : ±5 V, CA-□5 : ±10 V
	Input impedance	Current input: 20 Ω, Voltage input: 1 MΩ (CA-□3: 100 kΩ)
	No. of inputs	2 Nos.
	Input method	Single end		Floating
	A/D conversion method	Successive approximation method
	Sampling period	1 ms or more (1,000 times/sec. max.)
Switching inputs (Process number selection, External synchronization, Zero-adjustment, Reset, Auto-reference, Hold)		Operation: Negative logic Signal condition: 5 V-CMOS · LSTTL compatible
Comparative outputs (HH, HI, GO, LO and LL)		Relay contact 1a (HH, HI, LO and LL) Relay contact 1c (GO) ・Switching capacity: 250 V 1 A AC (resistive load) 30 V 1 A DC (resistive load) ・Electrical life: 100,000 switching operations or more (switching frequency 1,800 operations/hour) ・Mechanical life: 50 million switching operations or more (Switching frequency 18,000 operations/hour)	NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 35 V DC or less (between comparative output and COM.) ・Residual voltage: 1 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current)
	Response time	10 ms or less	1ms or less
Data outputs (A0 to D3, POL, DTV, OR)		-	-	BCD 4 digits, negative logic NPN open-collector transistor ・Maximum sink current: 70mA ・Applied voltage: 35 V DC or less (between data output and GND) ・Residual voltage: 1 V or less (at 70 mA sink current) 0.4 V or less (at 16 mA sink current)
Measurement value display		3 5/6 digit LED display (letter height: 14.2 mm 0.559 in)
	Display refresh rate	Selectable from 0.2, 0.5, 1, 2.5, 10 or 20 times/sec.
	Display range	–5999 to +5999 ("+" is not displayed)
	Display accuracy	± (0.1 % rdg + 2 digits) at +23 ± 5 ℃ +73.4 ± 41 ℉
	Temperature characteristics	±100ppmF.S./℃
Threshold value display		3 5/6 digit LED display (letter height: 8 mm 0.315 in)
	Display range	–5999 to +5999 ("+" is not displayed)
Process number display		1 digit LED display (letter height: 8 mm 0.315 in)
	Display range	0 to 7
Main functions		Process number selection, arithmetic, hold, scaling, auto-reference, power supply ON-delay, start delay, hysteresis setting, etc.
Ambient temperature		0 to +50 ℃ +32 to +122 ℉ (No dew condensation), strage: –20 to +70 ℃ –4 to +158 ℉
Material		Enclosure: ABS
Connecting method		Screw-on terminal block [BCD output type: Screw-on terminal block and connector (Note 2)]
Weight		Net weight: 500 g approx.
Dimensions		W96 x H48 x D145.2 mm W3.780 x H1.890 x D5.717 in
Accessory		Unit seal: 1 set

(Note 1) : Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.

(Note 2) : Purchase the mating connector for the BCD output type separately.
Recommended mating connector: HIF3BA-34D-2.54R (Manufactured by Hirose Electric CO., LTD.)

(Note 1) :	Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
(Note 2) :	Purchase the mating connector for the BCD output type separately. Recommended mating connector: HIF3BA-34D-2.54R (Manufactured by Hirose Electric CO., LTD.)

Return to top

Discontinued Products
Information

Specifications

Dimensions

If you have any questions, please select the option below to contact us or find answers.