[System Maintenance Notice]
Due to ongoing system maintenance, the site search and specification search functions are temporarily unavailable. We apologize for any inconvenience this may cause and appreciate your understanding.
【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Universal Sensor Mounting Stand MS-AJ
Cautions For Use
Mounting
- To mount the universal sensor mounting stand on your equipment, use M6 screws. The tightening torque should be 2.0 Nm or less.
Adjustment
- Arm, attachment, base and arm joint can be adjusted as shown by the
arrows in the right figure by loosening the M4 hexagonsocket-head bolts.
- After the adjustment, the tightening torque of the M4 hexagon-socket-head bolts should be 1.2 Nm or less.
|
|
Threading cable into pipe
- When the sensor is mounted on MS-AJ□ (basic assembly) or on MS-AJ□-A (lateral arm assembly), the sensor cable can be threaded through the pipe. However, do not thread the fiber cable through the pipe when a fiber head is mounted on MS-AJ□-F (assembly for fiber).
Others
- Do not apply excessive force on any part of the universal sensor mounting stand.
- When using this stand, take care that excessive vibration is not applied to the sensor.
Return to top
Return to top