AUTOMATION
CONTROLS

Search
Discontinued
Products



Communication Unit for Open Network SC-GU3

Order guide

Designation Appearance Model No. Description
Communication
unit for
CC-Link IE Field
SC-GU3-04 This is a communication unit, which can convert the output signal of a sensor amplifier into communication data for CC-Link IE Field.
Communication
unit for CC-Link
SC-GU3-01 This is a communication unit, which can convert the output signal of a sensor amplifier into communication data for CC-Link.
Communication
unit for DeviceNet
SC-GU3-02 This is a communication unit, which can convert the output signal of a sensor amplifier into communication data for DeviceNet.
Communication
unit for EtherCAT
SC-GU3-03 This is a communication unit, which can convert the output signal of a sensor amplifier into communication data for EtherCAT.
End unit SC-GU3-EU This end unit can change and check the settings of sensor amplifiers that allow optical communication and monitor operation status.
Cascading connector unit SC-71 This one-touch connector is used to connect the following devices to SC-GU3-0□:
The FX-500/410/311/300 fiber sensor, the LS-500/400 laser sensor, the DPS-400 digital pressure sensor, SC-E1, SC-A01 and SC-A02, etc
e-CON 1-channel
connector input
extension unit
SC-E1 This is a 1-channel connector input extension unit, compatible with an e-CON connector, can be connected to a NPN output type device.(Note 1)
Includes power and input signal indicators (for one channel). When using in combination with the SC-GU3 series, use with the SC-71.
e-CON 8-channel
connector input
extension unit
SC-E81 This extension unit can be connected to eight NPN output type devices. Includes power and input signal indicators (for eight channels).
e-CON 8-channel
connector input
extension unit
(without an input signal indicator)
SC-E82 This is an 8-channel connector input extension unit, compatible with an e-CON connector, can be connected to eight NPN output type devices.(Note 1)
(Uses eight channels of signaling, regardless of the number of connected input devices.) Includes a power indicator. Does not include an input signal indicator.
Analog voltage input unit SC-A01 This extension unit can be connected to NPN output type devices or analog voltage output type devices. When using in combination with the SC-GU3 series, use with the SC-71.
Analog current input unit SC-A02 This extension unit can be connected to NPN output type devices or analog current output type devices. When using in combination with the SC-GU3 series, use with the SC-71.
Note 1: Conditions of connectable DC 2-wire type input device
• Leak current: 1 mA or less (when the power is OFF), Offset voltage: 3 V or less (when the power is ON)
• Product whose load current range includes 5 to 8 mA

SYSTEM COMPOSITION

If optical communication is to be used in a system that includes models not compatible with optical communication, connect the incompatible models after the SC-GU3-EU.
A maximum of 12 units can be connected to the FX-500 / LS-500 series, and a maximum of 16 units can be connected to the other sensor amplifiers.

SYSTEM COMPOSITION

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

FAQ


Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)