【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Sensors
> Photoelectric Sensors / Laser Sensors
> Photoelectric Sensor with an Inverter Light Resistant Circuit CX(Discontinued Products)
> Specifications
Photoelectric Sensor with an Inverter Light Resistant Circuit CX (Discontinued Products)
|
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
Specifications
| Type | Thru-beam | Retroreflective | ||
|---|---|---|---|---|
| Long sensing range | With polarizing filters | |||
| Model No. | NPN output | CX-M10 | CX-RVM5 | CX-PRVM3 |
| PNP output (Note 2) |
CX-M10-PN | CX-RVM5-PN | CX-PRVM3-PN | |
| Sensing range | 10 m 32.808 ft | 0.1 to 0.5 m 32.808 to 19.685 in (Note 3) |
0.1 to 3 m 32.808 to 11.811 in (Note 3) |
|
| Sensing object | ø9 mm ø0.354 in or more opaque object |
ø50 mm ø1.969 in or more opaque or translucent object (Note 3, 5) |
ø50 mm ø1.969 in or more opaque, translucent or specular object (Note 3, 5) |
|
| Hysteresis | - | |||
| Repeatability (perpendicular to sensing axis) |
0.5 mm 0.020 in or less | |||
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |||
| Current consumption | Emitter: 10 mA or less Receiver: 30 mA or less (Note 6) |
40 mA or less (Note 7) | ||
| Sensing output | <NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between sensing output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between sensing output and +V) ・Residual voltage: 1.5 V or less (at 100 mA source current) 0.4 V or less (at 16 mA source current) |
|||
| Output operation | Switchable either Light-ON or Dark-ON | |||
| Self-diagnosis output | <NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V) ・Residual voltage: 1 V or less (at 50 mA sink current) 0.4 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between self-diagnosis output and +V) ・Residual voltage: 1 V or less (at 50 mA source current) 0.4 V or less (at 16 mA source current) |
|||
| Output operation | ON under unstable sensing condition. | |||
| Type | Diffuse reflective | Narrow-view | ||
|---|---|---|---|---|
| Long sensing range | Short sensing range | |||
| Model No. | NPN output | CX-D800 | CX-D100 | CX-ND300R |
| PNP output (Note 2) |
CX-D800-PN | CX-D100-PN | CX-ND300R-PN | |
| Sensing range | 800 mm 31.496 in (Note 4) |
100 mm 3.937 in (Note 4) |
70 to 300 mm 2.756 to 11.811 in (Note 4) |
|
| Sensing object | Opaque, translucent or transparent object (Note 5) |
Opaque, translucent or transparent object (Note 5) (Min. sensing object: ø0.5 mm ø0.020 in copper wire) |
||
| Hysteresis | 15 % or less of operation distance | |||
| Repeatability (perpendicular to sensing axis) |
0.5 mm 0.020 in or less | |||
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |||
| Current consumption | 40 mA or less (Note 7) | |||
| Sensing output | <NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between sensing output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between sensing output and +V) ・Residual voltage: 1.5 V or less (at 100 mA source current) 0.4 V or less (at 16 mA source current) |
|||
| Output operation | Switchable either Light-ON or Dark-ON | |||
| Self-diagnosis output | <NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V) ・Residual voltage: 1 V or less (at 50 mA sink current) 0.4 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between self-diagnosis output and +V) ・Residual voltage: 1 V or less (at 50 mA source current) 0.4 V or less (at 16 mA source current) |
|||
| Output operation | ON under unstable sensing condition. | |||
| Note 1 : | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |
|---|---|
| Note 2 : | Please note that the inverter light resistant circuit is not installed on the PNP output type. |
| Note 3 : | The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-230 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away. |
| Note 4 : | The sensing range of the diffuse reflective type sensor is specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
| Note 5 : | Make sure to confirm detection with an actual sensor befor use. |
| Note 6 : | For PNP output type, the current consumption is 40 mA or less. |
| Note 7 : | For PNP output type, the current consumption is 50 mA or less. |
|
| Type | Thru-beam | Retroreflective | ||
|---|---|---|---|---|
| Long sensing range | With polarizing filters | |||
| Model No. | NPN output | CX-M10 | CX-RVM5 | CX-PRVM3 |
| PNP output | CX-M10-PN | CX-RVM5-PN | CX-PRVM3-PN | |
| Test input (emission halt) function | Incorporated | - | ||
| Response time | 1 ms or less | |||
| Sensitivity adjuster | 2-turn adjuster with indicator | |||
| Automatic interference prevention function |
- | Incorporated (Two units of sensors can be mounted close together.) | ||
| Protection | IP67 (IEC) | |||
| Ambient temperature | -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed ) (Note 8) , Storage: -30 to +70 ℃ -22 to +158 ℉ |
|||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||
| Emitting element | Infrared (modulated) | Red LED (modulated) | ||
| Material | Enclosure: Heat-resistant ABS, Lens: Acylic, Indicator cover: Polyalylate | |||
| Net weight | Emitter: 50 g approx. Receiver: 50 g approx. |
50 g approx. | ||
| Accessories | MS-CX-1 (Sensor mounting bracket): 2 set Adjusting screwdriver: 1 pc. |
MS-CX-1 (Sensor mounting bracket): 1 set RF-230 (Reflector) : 1 pc., Adjusting screwdriver: 1 pc. |
||
| Dimensions | W12 x H31 x D25 mm W0.472 x H1.220 x D0.984 in | |||
| Type | Diffuse reflective | Narrow-view | ||
|---|---|---|---|---|
| Long sensing range | Short sensing range | |||
| Model No. | NPN output | CX-D800 | CX-D100 | CX-ND300R |
| PNP output | CX-D800-PN | CX-D100-PN | CX-ND300R-PN | |
| Test input (emission halt) function | - | |||
| Response time | 1 ms or less | |||
| Sensitivity adjuster | 2-turn adjuster with indicator | |||
| Automatic interference prevention function |
Incorporated (Two units of sensors can be mounted close together.) | |||
| Protection | IP67 (IEC) | |||
| Ambient temperature | -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed ) (Note 8) , Storage: -30 to +70 ℃ -22 to +158 ℉ |
|||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||
| Emitting element | Infrared LED (modulated) | Red LED (modulated) | ||
| Material | Enclosure: Heat-resistant ABS, Lens: Acylic, Indicator cover: Polyalylate | |||
| Net weight | 50 g approx. | |||
| Accessories | MS-CX-1 (Sensor mounting bracket): 2 set Adjusting screwdriver: 1 pc. |
|||
| Dimensions | W12 x H31 x D25 mm W0.472 x H1.220 x D0.984 in | |||
| Note 8 : | In case the sensor is to be used at an ambient tempreature of +15 ℃ +23 ℉, or less, please contact our office. |
|---|
|
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT US
BY EMAIL
BY EMAIL
Please click your area to select country or region
BY PHONE
- U.S.A.
- +1-800-344-2112
- Europe
- +49-89-45354-1000
- China
- +86-10-59255988
- Singapore
- +65-6299-9181
Related Information
Service & Support
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
