【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

AUTOMATION
CONTROLS

Search
Discontinued
Products



Cylindrical Photoelectric Sensor CY-100 SERIES (Discontinued Products)

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

Last time buy July 14, 2023
 
Specifications

Specifications

Type Thru-beam
Standard Side view
Model No. Light-ON CY-111A□ CY-111VA□
Dark-ON CY-111B□ CY-111VB□
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range 15 m 49.213 ft
Sensing object φ18 mm φ0.709 in or more opaque object
(Setting distance between emitter and receiver: 15 m 49.213ft)
Hysteresis -
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption Emitter: 35 mA or less
Receiver: 35 mA or less
Output <NPN output type>
NPN open-collector transistor
• Maximum sink current: 100 mA
• Applied voltage: 24 V DC or less (between output and 0 V)
• Residual voltage: 1.5 V or less
<PNP output type>
PNP open-collector transistor
• Maximum source current: 100 mA
• Applied voltage: 24 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less
  Utilization category DC-12 or DC-13
Short-circuit protection Incorporated
Response time 1 ms or less
Test input (emission halt) function Incorporated
Operation indicator Yellow LED (lights up when the output is ON)
(incorporated on the receiver for thru-beam type)
Power indicator Green LED (lights up when the power is ON)
(incorporated on the emitter)
Pollution degree 3 (Industrial environment)
Protection IP67 (IEC)
Ambient temperature –25 to +55 ℃ –13 to +131 ℉
(No dew condensation or icing allowed), Storage: –40 to +70 ℃ –22 to +158 ℉
Ambient humidity 50 % RH (at +70 ℃ +158 ℉)
Ambient illuminance Incandescent light: 5,000 ℓx or less at the light-receiving face
Voltage withstandability 500 V AC for one min. between all supply terminals connected together and enclosure
Vibration resistance 10 to 55 Hz frequency, 0.5 mm 0.02 in double amplitude in X, Y and Z directions for 1.5 hours each
Shock resistance 294 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (modulated)
  Peak emission wavelength 890 nm 0.035 mil
Material Enclosure: PBT, Lens: PMMA
Cable
(except for M12 plug-in connection type)		 0.44 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 10 m 32.808 ft is possible with 0.34 mm2, or more, cable (thru-beam type: both emitter and receiver).
Net weight
(Note 5)		 2 m cable length type Emitter/Receiver: 65 g approx. Emitter/Receiver: 70 g approx.
M12 plug-in connector type Emitter/Receiver: 15 g approx. Emitter/Receiver: 20 g approx.
Accessories Nut: 4 pcs.
Type Retroreflective
  With polarizing filters
Standard Side view Standard Side view
Model No. Light-ON CY-192A□ CY-192VA□ CY-191A□ CY-191VA□
Dark-ON CY-192B□ CY-192VB□ CY-191B□ CY-191VB□
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range 4 m 13.123 ft (Note 2) 2 m 6.562 ft (Note 2)
Sensing object φ50 mm φ1.969 in or more opaque, translucent or transparent object (Note 2, 4) φ50 mm φ1.969 in or more opaque, translucent, transparent or specular object (Note 2, 4)
Hysteresis -
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption 35 mA or less
Output <NPN output type>
NPN open-collector transistor
• Maximum sink current: 100 mA
• Applied voltage: 24 V DC or less (between output and 0 V)
• Residual voltage: 1.5 V or less
<PNP output type>
PNP open-collector transistor
• Maximum source current: 100 mA
• Applied voltage: 24 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less
  Utilization category DC-12 or DC-13
Short-circuit protection Incorporated
Response time 1 ms or less
Test input (emission halt) function -
Operation indicator Yellow LED (lights up when the output is ON)
(incorporated on the receiver for thru-beam type)
Power indicator -
Pollution degree 3 (Industrial environment)
Protection IP67 (IEC)
Ambient temperature –25 to +55 ℃ –13 to +131 ℉
(No dew condensation or icing allowed), Storage: –40 to +70 ℃ –22 to +158 ℉
Ambient humidity 50 % RH (at +70 ℃ +158 ℉)
Ambient illuminance Incandescent light: 5,000 ℓx or less at the light-receiving face
EMC EN 60947-5-2
Voltage withstandability 500 V AC for one min. between all supply terminals connected together and enclosure
Vibration resistance 10 to 55 Hz frequency, 0.5 mm 0.020 in double amplitude in X, Y and Z directions for 1.5 hours each
Shock resistance 294 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (modulated) Red LED (modulated)
  Peak emission wavelength 875 nm 0.034 mil 665 nm 0.026 mil
Material Enclosure: PBT, Lens: PMMA
Cable
(except for M12 plug-in connection type)		 0.44 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 10 m 32.808 ft is possible with 0.34 mm2, or more, cable (thru-beam type: both emitter and receiver).
Net weight
(Note 5)		 2 m cable length type 65 g approx. 70 g approx. 65 g approx. 70 g approx.
M12 plug-in connector type 15 g approx. 20 g approx. 15 g approx. 20 g approx.
Accessories Nut: 2 pcs.
Type Diffuse reflective
  With sensitivity adjuster
Standard Side view Standard Side view
Model No. Light-ON CY-121A□ CY-121VA□ CY-122A□ CY-122VA□
Dark-ON CY-121B□ CY-121VB□ CY-122B□ CY-122VB□
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range 100 mm 3.937 in (Note 3) 600 mm 23.622 in (Note 3)
Sensing object Opaque, translucent or transparent object
(Note 4)
Hysteresis 3 to 15 % of operation distance (Note 3)
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption 35 mA or less
Output <NPN output type>
NPN open-collector transistor
• Maximum sink current: 100 mA
• Applied voltage: 24 V DC or less (between output and 0 V)
• Residual voltage: 1.5 V or less
<PNP output type>
PNP open-collector transistor
• Maximum source current: 100 mA
• Applied voltage: 24 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less
  Utilization category DC-12 or DC-13
Short-circuit protection Incorporated
Response time 1 ms or less
Test input (emission halt) function -
Operation indicator Yellow LED (lights up when the output is ON)
(incorporated on the receiver for thru-beam type)
Power indicator -
Pollution degree 3 (Industrial environment)
Protection IP67 (IEC)
Ambient temperature –25 to +55 ℃ –13 to +131 ℉
(No dew condensation or icing allowed), Storage: –40 to +70 ℃ –22 to +158 ℉
Ambient humidity 50 % RH (at +70 ℃ +158 ℉)
Ambient illuminance Incandescent light: 5,000 ℓx or less at the light-receiving face
EMC EN 60947-5-2
Voltage withstandability 500 V AC for one min. between all supply terminals connected together and enclosure
Vibration resistance 10 to 55 Hz frequency, 0.5 mm 0.020 in double amplitude in X, Y and Z directions for 1.5 hours each
Shock resistance 294 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (modulated)
  Peak emission wavelength 875 nm 0.034 mil
Material Enclosure: PBT, Lens: PMMA
Cable
(except for M12 plug-in connection type)		 0.44 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 10 m 32.808 ft is possible with 0.34 mm2, or more, cable (thru-beam type: both emitter and receiver).
Net weight
(Note 5)		 2 m cable length type 65 g approx. 70 g approx. 75 g approx.
M12 plug-in connector type 15 g approx. 20 g approx. 25 g approx.
Accessories Nut: 2 pcs.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-420 reflector (optional).
3) The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 × 200 mm 7.874 × 7.874 in) as the object.
4) Make sure to confirm detection with an actual sensor before use for detection of the transparent object and the translucent object.
5) The weight includes the weight of nuts.

Return to top

Specifications
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE
Related Information
Service & Support

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)